Select a Brand

Element Technica

  
Element Technica Mantis Shoulder Mount

Element Technica Mantis Shoulder Mount

The Mantis is the industry's most configurable and innovative shoulder mounting solution for film and digital motion picture cameras. Fully compatible with the RED One of today, as well as the Scarlett and Epic of tomorrow.

Features:
- Dovetail interface allows quick setup; 20 seconds from tripod to hand held
- Multi axis adjustment allows shoulder pad to conform to any shoulder
- Two axis (rotational) adjustment shoulder pad
- Fore/aft linear adjustment shoulder pad
- Designed specifically for Arriflex style bridge plates (435, Arricam, Moviecam, Phantom, etc.)
- Utilizes conventional bicycle grips (use ours or bring your own)
- Telescopic and rotating handle extensions
- Handles and extensions use Arriflex compatible rosettes
- Mounting point for ViewFactor Origo remote start/stop button
- Available as a system or a la carte
- RED One owners will need the ET Arri-Style Base or similar Arri compatible bridge plate.


QTY:

$ 149.00/day

Add to Quote

  
Element Technica video break out for RED

Element Technica video break out for RED

This video break-out box converts the RED One's mini-coax connectors to industry standard HD-SDI BNC connectors in a tough, securely mounted package. It is low-profile and routes video to the rear and gen-lock toward the bottom. The chromed knob at the center of the unit actuates the four push/pull locking connectors simultaneously for easy installation and removal. The camera-hugging tab at the bottom utilizes one of the camera body's mounting holes for added security.

As far as the functionality of the breakout box, the idea is to install it and leave it in place until you have a reason to access the original connectors. We did not conceive of it as a macro connector for the 4 signals. The stock connectors are high quality and high bandwidth commercial RF connectors. They are typically chosen when signal integrity and space are guiding requirements.


QTY:

$ 39.00/day

Add to Quote

  
Element Technica 19mm Studio Hybrid for RED

Element Technica 19mm Studio Hybrid for RED

The 19mm Studio Kit replaces the 19mm Arri-Style Base on the RED One and includes the Hybrid Body Core and two 19mm Studio spacing clamps.


QTY:

$ 49.00/day

Add to Quote

  
Element Technica EVF Mount

Element Technica EVF Mount

The EVF Mounting System provides a secure mounting interface on either style of top bracket as well as 4" of vertical adjustment and 6" of telescoping adjustment along the viewfinder axis. In addition to the linear adjustment, it also provides a rugged clutch that allows the viewfinder to be tilted to almost any angle. It will stay where you put it regardless of shooting environment. All adjustments including clutch drag are easily adjusted on-the-fly without tools.

***NOTE***
When the Element EVF tube mount is being used, the Element Handle Risers are required for using the RED Handle Extension. The Red Handle can be used in conjunction with the tube mount without the risers but the handle extension cannot be used.


QTY:

$ 49.00/day

Add to Quote

  
Element Technica EVF Extension

Element Technica EVF Extension

Element Technica has created a companion product for our popular EVF Mount which finally adds gear head and dolly functionality. Our eyepiece extension lengthens the distance between our EVF Mount clutch and the EVF for the RED One. It is fully compatible with the ARRI telescopic leveling rod and allows the EVF to maintain a constant tilt angle even during extreme tilting of the camera. Installation is tool-less and only takes seconds.


QTY:

$ 29.00/day

Add to Quote

  
Element Technica Arri Dovetail 2060

Element Technica Arri Dovetail 2060

Element Technica has improved the Arri standard dovetail by modifying the
outside edge to match the top of the OConnor fluid head. This feature allows
you to eliminate the OConnor release plate thereby eliminating an extra
interconnect while reducing the stack height.

Element's Arri / O'Connor style
dovetail is compatible our 15MM and 19MM RED bridge plates (available
through RED.com), our Hybrid system, and all other Arriflex standard bridge plates.


QTY:

$ 39.00/day

Add to Quote
 


We accept major credit cards with 
          PayPal