Rent Transmitters, Receivers

Wireless video transmitters and receivers

  
Wireless Video System 1080p HD-SDI HDMI 2000ft Range

Wireless Video System 1080p HD-SDI HDMI 2000ft Range

This HD-SDI HDMI transmitter and receiver system offers full 1080p uncompressed HD video with >1ms latency for Line-of-Sight ranges of over 2000ft. HD-SDI and HDMI inputs and outputs are standard.

Features:
- Plug & Play
- Full 1080p HD Wireless Video up to 2000ft. Clear-Line-of-Sight Range
- >1ms Latency (video delay) uncompressed video
- HD-SDI and HDMI inputs for TX and outputs for RX
- Great for any video application where running cables not an option
- Lightweight Transmitter, only 8 oz. (224 grams)
- 1/4 20 Brass Threaded inserts for easy mounting of Transmitter and Receiver
- 4-Pin LEMO power inputs for Transmitter and Receiver
- 10-Channel TX & RX for use of up to 4 systems in the same area
- Multi-casting so multiple Receivers can view the same Transmitter
- RSSI indicators on Receiver to display incoming signal strength


QTY:

$ 399.00/day

Add to Quote

  
Teradek Bolt Pro 300 3G-SDI Wireless Transmitter-Receiver Set

Teradek Bolt Pro 300 3G-SDI Wireless Transmitter-Receiver Set

Transmit uncompressed 1080p video wirelessly over 300 feet with the Teradek Bolt Pro 300 3G-SDI Wireless Transmitter-Receiver Set. Included in this set are a Teradek Bolt 300 transmitter and receiver both equipped with 3G-SDI ports. The units in this kit are compact and feature internal antennas so they can fit on your camera rig and in your video village, DIT cart, or director's monitor rig.

When transmitting uncompressed video, latencies of less than one millisecond can be achieved if no other video processing is necessary. Unnoticeable latency is important for directors and focus pullers to see the action at the same time the camera does.

A boon for DITs, the USB GRAB engine streams the uncompressed video straight out of the receiver and into a PC for immediate recording. With this video available, rough edits can be made even before the footage is offloaded from the camera.

Features:
- Uncompressed Video and Audio Transmission
- Supports Resolutions up to 1080p60
- 300ft Distance with 1ms Latency
- Uses License-Free 5 GHz Frequency
- 3G-SDI Input & Loop; 3G-SDI Output
- Video Output via USB 3.0 GRAB Engine
- Internal Antennas

Color monitors are available separately


QTY:

$ 249.00/day

Add to Quote

  
Starlink SL1450 UltraPRO 2.4 GHz Wireless Video Transmitter

Starlink SL1450 UltraPRO 2.4 GHz Wireless Video Transmitter

- 8 Channel Selectable from 2350 MHz to 2550 MHz Wireless Transmitter
- 1000 Milliwatt Power Level
- SMA Antenna Connector
- NTSC/SD Video In, RCA Line Level Audio In
- Built-in OnBoard ThermaCool Power System
- VariPower System, Designed for Direct Connection to Anton/Bauer PTAP JACK
- Includes 3 dB SuperFLEX Fold-Up Dipole Antenna
- Ruggedized Machine Billet Aluminum Case
- Machined BNC Video Input Port
- SwitchCraft Locking DC Power Connector
- Built-In 1/4 20 Female Camera Thread Mount


Call for a Quote

  
Starlink SL2900 PLUS 2.4 GHz Wireless Video LCD Receiver

Starlink SL2900 PLUS 2.4 GHz Wireless Video LCD Receiver

- 8 Channel, High Gain Multi-Mode Wireless LCD Receiver
- Optimized for Long Range Signal Reception
- 5.0" High Quality Color LCD
- Adjustable Brightness and Volume Controls
- Power "ON" and "OFF" Switch
- Channel Frequency Selector with Multi-channel LED Status Indicators
- No-Spin Antenna Mount
- Includes Fold-Up Dipole Antenna, 12V Regulated Mini AC Adapter and Accessory Cable Set with Tilt-Swivel Base


Call for a Quote

  
Teradek Cube-150 1 Channel HD-SDI Encoder

Teradek Cube-150 1 Channel HD-SDI Encoder

The Teradek Cube-150 1 Channel HD-SDI Encoder is a camera-top HD video encoder, and is suitable for on-set video monitoring as well as full-scale film production. It features HD-SDI (serial digital interface) input, dual band WiFi (2.4/5.8 GHz), and an external USB port. In addition, the cube encoder features line-of-sight (waves traveling straight line) WiFi range up to 300' (91m).

Featuring a setup wizard, the Cube 150 HD-SDI Encoder web interface simplifies configuration. You can create a network, log on to Cube's web interface, complete the setup wizard, and start streaming video after connecting video to the Cube system. The Cube 150 HD-SDI Encoder features H.264 High Profile (level 4.1) video compression to offer high video quality at lower bit rates.

Downscaling to lower resolutions is possible via a built-in scaler that allows for output streaming resolutions of 1080p/PsF, 1080i, 720p, and 480i. Based on available IP bandwidth, you can choose target bit rates (HD - 2 to 4Mbps, SD sub-1Mbps) and a video resolution as required. The Cube encoder offers end-to-end latency (time delay) of 1/8-1/2 second.

With a small size and compact design, the Cube 150 HD-SDI Encoder can be mounted to a rail system, cage, hotshoe, or camera baseplate. In addition, it can be used with camera systems such as Red One, Arri Alexa, and Panavision Genesis. The Cube encoder requires only 2.5W DC power.


QTY:

$ 149.00/day

Add to Quote

  
Canatrans Video Transmitter, 250mW

Canatrans Video Transmitter, 250mW

This is the 250mW Canatrans Video Transmitter. Line of sight transmitting distance is roughly 1,000 feet. It has 6 user selectable NTSC UHF channels of 38-43. It measures 6"x3"x2" and weighs 17 oz. The unit is powered via a 4 pin XLR connector, 385 mA consumption @ 13.5 VDC. Video in is thru a BNC connector. Note that this transmits video only, not audio.


Call for a Quote

  
IDX CW-5HD Cam Wave HD Video Wireless Transmission System

IDX CW-5HD Cam Wave HD Video Wireless Transmission System

The IDX CW-5HD Cam-Wave HD is a wireless transmitter and receiver designed to connect HD video cameras to either a monitor or recording device. The system produces an uncompressed signal without the need to run any pesky cables, at a range of up to 150'. The transmitter can run off 1 V-Mount series battery or function off DC power through its 3-Pin XLR input. Weighing in at a little over 1.8 lbs, the CW-5HD provides premium high definition wireless support without adding additional bulk to the entire camera.

Uncompressed Wireless Signals
The CW-5HD transmits pristine video from either SD-SDI or HD-SDI, producing a completely uncompressed signal. The signal can then be fed into a field monitor, studio monitor, or recording deck. Additionally, video signals can be transmitted with 256-bit encryption, making sure there are no "prying eyes".

Instant Transmission
The CW-5HD has less than a 1ms latency between transmitting and receiving.




Download:
Operation Manual

QTY:

$ 299.00/day

Add to Quote

  
Transvideo "Titan" Video Transmitter

Transvideo "Titan" Video Transmitter

The first multi-directional Microwave Wireless Transmitter and receiver system
broadcasting through obstacles without desynchronization of the video picture.
- ideal for all Body-rig operators; the signal remains stable even both the Transmitter and the Receiver are in motion.
- very user friendly: the 4 channels are pre-dialed and accessible with the flip of a switch. No tools required.
- transmits & receives NTSC, PAL and SECAM color signals as well Black and White.
- operates on 9-36 V DC via Lemo 2 or Hirose 6 connectors. The Hirose 6 connector carries video out (Receiver) or video in (Transmitter) and accepts DC in.
- Transmitter and Receiver weigh 7oz (200g) each. Very compact they can be easily velcroed to any camera or monitor.
- 2.4Ghz channels:
A= 2.4125 Ghz
B= 2.4275 Ghz
C= 2.4425 Ghz
D= 2.4575 Ghz

WIRELESS VIDEO WARNINGS AND TIPS

Since the first wireless video transmitters were developed there have been millions of devices built and put in current use that use the RF bandwidth for very many purposes. Start with your cell phone and the millions of others all transmitting at the same time, full time. Then we have blue tooth and hot spots and wifi.

Don't forget about security systems, wireless drone and game machines and countless of other radio frequency emissions. All of these signals are out there to compete with your single video path.

The success of a video transmission, therefore, depends on a huge number of competitive signals all fighting for the space. If you change the frequency of the intended video path you have extra chances of a clean signal if your choice of a frequency is not one of the competitive signals or a multipath frequency.

The first and most important guideline for a user of this equipment is to run a test in advance of the event, performance or videotaping/screening of the signal.

If the advance test works fine...and note that with with the TransVideo STANDARD DEFINITION wireless video you have a switchable selection of four frequencies which can, in a clean and signal-free environment deliver a clean video image over anywhere from 50 to 1000 feet depending on the environmental makeup of the location. RF does not like metal of any kind (look up Faraday cage in google-this is a place designed so that NO signals can penetrate discovered in 1836). Clear line of sight from the antenna of the transmitter to the receiver is the ideal arrangement. Helicopters have been used for years as a reliable relay station from ground level signals to a broadcast, live, or video taped, if unmovable obstructions like buildings, vehicles, or other potential signal blocking structures are encountered.

Receiver positioning is extremely important. Think about the signal blocking as described above. If you can place the receiver above the area where you are transmitting from that simple relocation (taking the video signal from the receiver with a simple BNC cable to the recorder or live feed.

Keep in mind that once you have done the first step of testing to a perfect signal prior to the "go time" your next contest is to avoid and eliminate as many of the portable and temporary devices that will bring new and untested RF (EMF) signals to the location.

If the signal is in any way degraded on the work day, start with eliminating cell phones and any new switched on devices. Relocate the actual receiver.

These transmitter-receivers can do a good job. If conditions are compatible with them great.

If not, then the options become expensive as in $1500 a day or more for a serious and state-of-the-art high definition broadcast system.

Call Budget Video Rentals 24/7 for further technical assistance


QTY:

$ 99.00/day

Add to Quote

  
Transvideo "Titan" Video Receiver

Transvideo "Titan" Video Receiver

4 channel wireless video receiver for above transmitter.

WIRELESS VIDEO WARNINGS AND TIPS

Since the first wireless video transmitters were developed there have been millions of devices built and put in current use that use the RF bandwidth for very many purposes. Start with your cell phone and the millions of others all transmitting at the same time, full time. Then we have blue tooth and hot spots and wifi.

Don't forget about security systems, wireless drone and game machines and countless of other radio frequency emissions. All of these signals are out there to compete with your single video path.

The success of a video transmission, therefore, depends on a huge number of competitive signals all fighting for the space. If you change the frequency of the intended video path you have extra chances of a clean signal if your choice of a frequency is not one of the competitive signals or a multipath frequency.

The first and most important guideline for a user of this equipment is to run a test in advance of the event, performance or videotaping/screening of the signal.

If the advance test works fine...and note that with with the TransVideo STANDARD DEFINITION wireless video you have a switchable selection of four frequencies which can, in a clean and signal-free environment deliver a clean video image over anywhere from 50 to 1000 feet depending on the environmental makeup of the location. RF does not like metal of any kind (look up Faraday cage in google-this is a place designed so that NO signals can penetrate discovered in 1836). Clear line of sight from the antenna of the transmitter to the receiver is the ideal arrangement. Helicopters have been used for years as a reliable relay station from ground level signals to a broadcast, live, or video taped, if unmovable obstructions like buildings, vehicles, or other potential signal blocking structures are encountered.

Receiver positioning is extremely important. Think about the signal blocking as described above. If you can place the receiver above the area where you are transmitting from that simple relocation (taking the video signal from the receiver with a simple BNC cable to the recorder or live feed.

Keep in mind that once you have done the first step of testing to a perfect signal prior to the "go time" your next contest is to avoid and eliminate as many of the portable and temporary devices that will bring new and untested RF (EMF) signals to the location.

If the signal is in any way degraded on the work day, start with eliminating cell phones and any new switched on devices. Relocate the actual receiver.

These transmitter-receivers can do a good job. If conditions are compatible with them great.

If not, then the options become expensive as in $1500 a day or more for a serious and state-of-the-art high definition broadcast system.

Call Budget Video Rentals 24/7 for further technical assistance


QTY:

$ 99.00/day

Add to Quote

  
Teradek Dual Wireless Video Cigarette Girl*

Teradek Dual Wireless Video Cigarette Girl*

Two channel, portable wireless video monitor system.

Includes:
(1) custom cigarette girl tray
(2) Teradek video transmitters
(2) Terdek video receivers
(2) LCD monitors (5-8 inches)
(3) lithium long life Anton Bauer type batteries
(1) battery charger

*girl not included

Read more...


QTY:

$ 699.00/day

Add to Quote

  
Cigarette Girl* - Single Monitor Package

Cigarette Girl* - Single Monitor Package

Single channel, portable wireless video monitor system.
Includes:
(1) custom cigarette girl tray
(1) Teradek video transmitter
(1) Teradek video receiver
(1) LCD monitor (5-8 inches)
(2) lithium long life Anton Bauer type batteries
(1) battery charger

*girl not included

Read more...


QTY:

$ 349.00/day

Add to Quote

  
Modulus UHF Video Transmitter

Modulus UHF Video Transmitter

UHF wireless video transmitter


QTY:

$ 99.00/day

Add to Quote

  
Coherent VHF Video Receiver/Trans Set

Coherent VHF Video Receiver/Trans Set

Includes one transmitter


QTY:

$ 149.00/day

Add to Quote

  
Coherent VHF Video Transmitter

Coherent VHF Video Transmitter


QTY:

$ 99.00/day

Add to Quote

  
Sony TU-1041U Stereo TV Tuner

Sony TU-1041U Stereo TV Tuner

The Sony TU-1041 is the television tuner component for industrial and broadcast monitors. With a simple 1 button selection, the TU-1041 tuner can be automatically programmed to tune in all receivable channels, from lowest frequency to the highest.
- Manual or automatic fine tuning
- Uses an internal NP-1 battery
- 4-pin XLR connector for external DC battery belt.


QTY:

$ 69.00/day

Add to Quote

  
Teradek Cube 155 HD-SDI Encoder with WiFi

Teradek Cube 155 HD-SDI Encoder with WiFi

The Teradek Cube 155 HD-SDI Encoder with WiFi is a wireless camera-top video and embedded audio encoder. It connects to a camera by SDI and streams proxy files/dailies in H.264 to a decoder or website. You can stream by dual-band WiFi wherever a network is available, by Ethernet via an optional router, or by an optional 3G/4G modem connection. You can also store the files to a MicroSD card as the Cube features a MicroSD slot with support for up to 32GB cards.

For mounting, the Cube attaches either onto a camera's hot-shoe or onto a cage/rig by an included 1/4"-20 mounting screw. Aside from the SDI input, connections consist of an Ethernet port, a 1/8" line/mic input, and a headphone jack. A micro USB slot is available for charging and configuring.

The Teradek Cube has a rechargeable internal lithium-ion battery that lasts up to two hours. It can also be powered with the included AC power adapter or by an external battery via a 2-pin Lemo input. An OLED screen indicates what the remaining battery life is and also displays online status and the URL being streamed to. Optionally, Teradek offers camera batteries with 2-pin Lemo output so you can easily power both the camera and Teradek with the same battery. The following three 2-pin Lemo batteries can be used for power: the Teradek Canon BP-945, Teradek Panasonic D54, and the Teradek Panasonic VW-VGB6.

SDI Connection to a Camera

Streams proxy files in H.264 to a decoder or website
Streams by WiFi, by Ethernet, or by optional 3G/4G modem
Stores files to an optional MicroSD card of up to 32GB in capacity
Attaches to a camera's hot-shoe or onto a cage/rig by a 1/4"-20 screw
Powered by a two hour internal battery or by an included AC power adapter
An OLED screen indicates battery life, online status, and the URL being streamed to


QTY:

$ 149.00/day

Add to Quote

  
Teradek Bolt Pro Wireless 1080p60 SDI Monitoring Transmitter

Teradek Bolt Pro Wireless 1080p60 SDI Monitoring Transmitter

The Teradek Bolt Pro Wireless 1080p60 SDI Monitoring Transmitter & Receiver wirelessly transmits an uncompressed HD video signal in up to 1080p60 4:2:2 as far as 300 ft with zero delay. The receiver features two 3G-SDI outputs for dual monitoring. One of these can be used to pass the video signal to an optional Teradek Cube Encoder, which will stream the signal even further on by WiFi or Ethernet, although only in up to 1080p30.

The Bolt Pro transmitter has a looping SDI output for local monitoring, a 70 minute internal battery, and can connect to more than one receiver in order to multiply the outputs.
Wireless 1080p60 4:2:2
The Bolt Pro Transmitter and Receiver set can wirelessly transmit 1080p60 4:2:2 up to 300 ft with zero delay.

1 TX to Multiple RX
A second and even more than two receivers can be added into the setup. One Bolt Pro transmitter can transmit full 1080p60 HD video to multiple receivers simultaneously. Bolt receivers have dual 3G-SDI outputs, which can connect to field monitors, switchers, and also Teradek Cube Encoders.

WSDI Pro Connectivity
Bolt transmits uncompressed video using WSDI Pro, which provides a wireless range of up to 300 ft and can coexist with other wireless equipment by dynamically adjusting the frequency bands used in real time. Bolt Pro transmitters have loop-through SDI outputs that you can connect to local monitors or recorders.

Internal Battery / P-Tap / Lemo DC for External Batteries
The transmitter has an internal 70 minute battery and a P-tap input for connecting to camera batteries. An AC power supply is included for the receiver. The transmitter and receiver each also have a Lemo DC input for connecting external V-mount or Gold-mount batteries.

Rugged Design
The transmitter has a milled aluminum body, and the receiver has an ABS plastic body. Both the transmitter and receiver have 1/4" mounting threads and can be attached right onto or next to the equipment you'll be using them with.


Transmitter
Connections:
1x SD/HD/3G-SDI input
1x looping 3G-SDI output
Resolutions: Up to 1080p60
Wireless Range: Up to 300 ft (91 m)
Power: Low power: ~4.5 W
Lemo 6 - 16 V DC input
Rechargeable lithium-ion battery with 70 minute run time
Chargeable over mini USB port or DC input
Encryption: AES128
Chassis: Milled aluminum
Mount Type: 1/4"-20 threads
Operating Temperature: 32 to 122F (0 to 50C)
Dimensions: 2.3 x 4.3" (5.8 x 11 cm)
Weight: 0.4 lb (0.2 kg)

Receiver
Connections: 2x SD/HD/3G-SDI outputs
Resolutions: Up to 1080p60
Power: Low power: ~6 W
Lemo 6-28 V DC input
Chassis: Durable ABS plastic
Mount Type: 1/4"-20 through-hole
Dimensions: 2.95 x 4.3" (7.5 x 11 cm)


QTY:

$ 149.00/day

Add to Quote
 


We accept major credit cards with 
          PayPal