Kessler 3 foot CineSlider |
The Kessler CineSlider is a heavy duty portable mini-dolly / linear slider system for camera rigs weighing up to 80 pounds. Weighing in at only 9 pounds, with a length of 40.5 inches, 5 inches wide, and a total camera travel distance or 35.5 inches, the CineSlider is a very portable solution to get those quick, smooth short-run dolly movements, without having to transport a large dolly system. Features include drag control and locking, handle with adjustable arc diameter for ultimate movement control, smooth rolling precision stainless steel ball bearing Delrin wheels, and multple mounting options.
The CineSlider can be center mounted flush to the optional Kessler Hercules 2.0 head to achieve panning and tilting movements, center mounted to a 100mm bowl tripod with the optional 100mm Ball Mount Kit, or support from both ends with a combination of a standard tripod / fluid head or lightstand or monopod.
Camera mounting options include the Quick Release Plate and Receiver that comes standard. Also included with the CineSlider is a 3/8" standard mounting bolt, for flat mounting a fluid head to the carriage.
Package Includes:
- 3 foot CineSlider
- Fluid Head
- Kessler Outrigger Feet
More Details...
|
Kessler 5 foot CineSlider |
The Kessler 5 foot CineSlider is a heavy duty portable mini-dolly / linear slider system for camera rigs weighing up to 80 pounds. Weighing in at only 12 pounds, with a length of 60.5 inches, 5 inches wide, and a total camera travel distance or 51 inches, the CineSlider is a very portable solution to get those quick, smooth short-run dolly movements, without having to transport a large dolly system
The CineSlider can be center mounted flush to the Kessler Hercules 2.0 head (mounts to 100mm or 75mm bowl tripod legs) to achieve panning and tilting movements, center mounted to a 100mm or 75mm bowl tripod with the optional Ball Mount Kit, or supported from both ends with a combination of a standard tripod / fluid head or lightstand or monopod. Due to the length of the 5 foot CineSlider, depending on the weight of your camera, you may need to support the unit on both ends with tripods, lights stands, etc, or set it on a flat surface. If setting on the ground, we recommend the Outrigger Feet (included in package) for the best support and stability.
Camera mounting options include the Quick Release Plate and Receiver that comes standard. Also included with the CineSlider is a 3/8" standard mounting bolt, for flat mounting a fluid head to the carriage.
Package Includes:
- 5 foot CineSlider
- Bogen 503
- Kessler Outrigger Feet
More Details...
|
Kessler K-Pod Tripod Legs |
The Kessler K-Pod System is a revolutionary tripod system designed to support camera cranes / jibs. The K-Pod has extremely rigid double strut legs with the patent pending incremental Posi-Lock System, that friction locks the legs, as well as interlocks into incremental lock pockets. The lock pockets allow you to equally position the legs while providing a lock that can not slip down.
The pop-lock spreader system locks the legs in a pre-stressed position to eliminate instability in heavy load conditions, and acts as the frame system for the various dolly configurations.
The K-Pod was designed to be the best tripod system for your camera crane / jib, but it is also an excellent tripod to shoot from, when not using your crane.
The K-Pod comes with standard pad feet, but has multiple foot/wheel options available including dual locking dolly caster wheels, dual locking "all-terrain" wheels, stainless steel spikes, and swiveling track dolly trucks.
Features:
- Unrivaled 500 lbs maximum capacity (226 kg)
- Min height: 37" (94 cm)
- Max height: 64" (162 cm)
- Weight: 22lbs (10 kg)
More Details...
|
Kessler ElektraDRIVE 200 Motor w/ORACLE Controller |
The elektraDRIVE Motor Pod is our interchangeable motor drive system for use with our sliders and other elektraDRIVE line of products.
The 200 Series motor is the suggested normal use motor for the CineSlider.
Approximate Dynamic Range for continuous movement at the lowest and highest motor speed settings.
Speed Range:
- 1 min 48 sec/ft (slowest)
- 2.4 sec/ft (fastest)
ORACLE Controller Supported Features:
- Now includes SmartLapse™ programmable motion control.
- Backlite LCD display with menu and setting values.
- Fully adjustable controls for Max Speed, Dampening, and Dead Band.
- Movement Recording / Memory Function with three memory banks.
- Time Lapse control
- Premium Multi-Function Joystick
- Joystick orientation can be easily set in the menu.
- Cabling is CAT5 / CAT6 cable with RJ45 connectors (standard network cable).
- Powered by standard AC power supply with wall plug, or optional 12v DC adapter and battery pack.
More Details...
|
Kessler ElektraDRIVE 500 Motor w/ORACLE Controller |
The elektraDRIVE Motor Pod is our interchangeable motor drive system for use with our sliders and other elektraDRIVE line of products.
The 500 Series motor is the suggested Time Lapse (slow) motor for the CineSlider and has the most torque.
Approximate Dynamic Range for continuous movement at the lowest and highest motor speed settings.
Speed Range:
- 3min 53 sec/ft (slowest)
- 3.9 sec/ft (fastest)
ORACLE Controller Supported Features:
- Now includes SmartLapse™ programmable motion control.
- Backlite LCD display with menu and setting values.
- Fully adjustable controls for Max Speed, Dampening, and Dead Band.
- Movement Recording / Memory Function with three memory banks.
- Time Lapse control
- Premium Multi-Function Joystick
- Joystick orientation can be easily set in the menu.
- Cabling is CAT5 / CAT6 cable with RJ45 connectors (standard network cable).
- Powered by standard AC power supply with wall plug, or optional 12v DC adapter and battery pack.
More Details...
|
Kessler Revolution Pan/Tilt Head w/ORACLE Controller |
The Kessler REVOLUTION Pan and Tilt System is our answer to the need for an affordable, quality motorized pan and tilt head. After two years of development, we have produced a motorized head that addresses the failings of other pan / tilt heads in this price range. When paired with the ORACLE Controller, we honestly feel the REVOLUTION is the most feature rich and best motorized head solution on the market.
REVOLUTION Head Features:
- Billet aluminum with stainless steel hardware construction.
- Dual motors for each axis, provide zero backlash and 100% holding power (no drifting).
- Superior Dynamic Range. Unit is both faster and slower than other heads at similar price point.
- Ball bearing and belt drive to eliminate gear to gear noise.
- Pass-through axle points, for easy cable routing.
- Cabling is CAT5 / CAT6 cable with RJ45 connectors (standard network cable). NO EXPENSIVE PROPRIETARY CABLES!!
- Unit Weight: 10 lbs.
- Weight Capacity: 20 lbs.
ORACLE Controller Supported Features:
- Now includes SmartLapse™ programmable motion control.
- Backlite LCD display with menu and setting values.
- Fully adjustable controls for Max Speed, Dampening, and Dead Band.
- Movement Recording / Memory Function with three memory banks.
- Time Lapse control
- Premium Multi-Function Joystick
- Joystick orientation can be easily set in the menu.
- Cabling is CAT5 / CAT6 cable with RJ45 connectors (standard network cable).
- Powered by standard AC power supply with wall plug, or optional 12v DC adapter and battery pack.
More Details...
|
| |
Rental Quote
