RED 320GB RAID Kit

[ + enlarge ]

Made of two 160GB Drives that are Striped as a RAID 0 for speed. Capable of recording between two and three hours of 4K REDCODE™ RAW footage. Use with the RED ONE.

Kit includes 320GB drive, RED Lemo cable, 6ft Firewire 800 cable, Raid AC cable

$ 99.00/day

  
RED 5.6" Onboard LCD

$ 89.00/day

  
RED 5.6" Onboard LCD Kit

[ + enlarge ]

Includes LCD, 5" RED arm, 1ft RED Lemo Cable

$ 99.00/day

  
RED 8GB Compact Flash

$ 15.00/day

  
RED 16GB Compact Flash

Price is for a single card but we have plenty of them.

$ 39.00/day

  
RED Brick Battery 140Wh

[ + enlarge ]

$ 15.00/day

  
RED Battery Charger

[ + enlarge ]

Charges two RED brick batteries

$ 25.00/day

  
RED Cheese plate

[ + enlarge ]

$ 12.00/day

  
RED Grip - Left

$ 10.00/day

  
RED Grip - Right

$ 10.00/day

  
RED Side Handle

[ + enlarge ]

- Connects from top 19mm RODS to bottom 19mm RODS
- Mount a variety of hardware (eg, RED LCD, RED EVF, etc)

$ 49.00/day

  
RED arm, 9 inch

[ + enlarge ]

9-inch adjustable mounting arm for EVF and LCD

$ 12.00/day

  
RED Electronic Viewfinder (EVF)

[ + enlarge ]

- Content: 720P color image plus GUI
- Resolution (color): 24-bit RGB, expandable to 30-bit at default Dark Detail setting
- Colorimetry: Rec. 709 (nominal)
- Dynamic range: 500:1 typical at default Dark Detail setting
- Display rate: Up to 60 FPS (depending on display mode)
- Display modes: Free run (60 FPS independent of camera shutter speed), Synchronous (integer multiple of camera shutter speed), and Open Gate (images at 2x camera shutter speed for follow-focus work. NOTE: With camera at 23.98 / 24 / 25 / 30 FPS and shutter angle < 180 degrees)
- Resolution (pixels): 1280 (wide) x 848 (high) full-color
- Eyepiece optics: Fully coated with – 2.5 to + 1.5 diopter correction range

$ 149.00/day

  
RED Viewfinder Mount

The EVF Mounting System provides a secure mounting interface on either style of top bracket as well as 4" of vertical adjustment and 6" of telescoping adjustment along the viewfinder axis. In addition to the linear adjustment, it also provides a rugged clutch that allows the viewfinder to be tilted to almost any angle. It will stay where you put it regardless of shooting environment. All adjustments including clutch drag are easily adjusted on-the-fly without tools. The integral handle/battery bracket is adjustable in length and angle to allow proper balance. It is also tapped to allow easy rigging of accessories and Steadicam low mode mounts.

$ 49.00/day

  
RED 18-50mm F2.8 CF Lens

Focal Length Range: 18-50mm
T Stop Range: T3 - T22
Maximum f Stop: f/2.8
Close Focus from Lens Front: 1.73"
Front of Lens to Image Plane: 6.16"
Minimum Marked Object Distance: 8"
Maximum Format Covered: Super 35mm
Length from Front to Lens Mount: 4.12"
Front Diameter 4.5"
Weight 1.05 kg / 2.3 lbs.

$ 149.00/day

  
RED 50-150mm T3 (F2.8) Zoom Lens

Focal Length Range: 50-150mm
T Stop Range: T3 - T22
Maximum f Stop: f/2.8
Close Focus from Lens Front: 31.6"
Front of Lens to Image Plane: 7.8"
Minimum Marked Object Distance: 42"
Maximum Format Covered: Super 35mm
Length from Front to Lens Mount: 5.75"
Front Diameter 4.5"
Weight 1.5 kg / 3.3 lbs.

$ 149.00/day

  
RED Nikon Mount Lens Adaptor

[ + enlarge ]

Replaces standard RED PL MOUNT to allow mounting of Nikon lenses

$ 49.00/day

  
Arri Shift and Tilt Lens System

The Arri Shift & Tilt lens system is an articulating bellows lens mount that allows the lens to be positioned separately from the camera in five different directions. This allows angles to be shifted, parallel lines to be aligned and selective focus within the image plane. It is a unique optical system that achieves images impossible any other way.

Included in the set are four lenses, 24mm T4, 45mm T2.8, 90mm T2.8 and 110mm T2. The system works with any PL mount camera including 35mm film, 16mm film, 35mm lens adapters for video cameras and Digital Cinema cameras with single sensor imagers.

$ 349.00/day

  
Angenieux Optimo 24-290mm Zoom Lens

[ + enlarge ]

The Angenieux Optimo 24-290 is the industry standard for high performance optical quality, offering brilliant clarity in an extreme focal range at a fast aperture.

- Zoom ratio: 12x
- Focal length: 24-290mm
- Aperture: T2.8
- MOD: two feet (.6m)
- Weight: 24 lbs. (11kg)
- Front diameter: 162mm

$ 579.00/day

  
Element Technica Mantis Shoulder Mount

[ + enlarge ]

The Mantis is the industry's most configurable and innovative shoulder mounting solution for film and digital motion picture cameras. Fully compatible with the RED One of today, as well as the Scarlett and Epic of tomorrow.

Features:
- Dovetail interface allows quick setup; 20 seconds from tripod to hand held
- Multi axis adjustment allows shoulder pad to conform to any shoulder
- Two axis (rotational) adjustment shoulder pad
- Fore/aft linear adjustment shoulder pad
- Designed specifically for Arriflex style bridge plates (435, Arricam, Moviecam, Phantom, etc.)
- Utilizes conventional bicycle grips (use ours or bring your own)
- Telescopic and rotating handle extensions
- Handles and extensions use Arriflex compatible rosettes
- Mounting point for ViewFactor Origo remote start/stop button
- Available as a system or a la carte
- RED One owners will need the ET Arri-Style Base or similar Arri compatible bridge plate.

$ 149.00/day

  
Element Technica video break out for RED

[ + enlarge ]

This video break-out box converts the RED One's mini-coax connectors to industry standard HD-SDI BNC connectors in a tough, securely mounted package. It is low-profile and routes video to the rear and gen-lock toward the bottom. The chromed knob at the center of the unit actuates the four push/pull locking connectors simultaneously for easy installation and removal. The camera-hugging tab at the bottom utilizes one of the camera body's mounting holes for added security.

As far as the functionality of the breakout box, the idea is to install it and leave it in place until you have a reason to access the original connectors. We did not conceive of it as a macro connector for the 4 signals. The stock connectors are high quality and high bandwidth commercial RF connectors. They are typically chosen when signal integrity and space are guiding requirements.

$ 39.00/day

  
Element Technica 19mm Studio Hybrid for RED

[ + enlarge ]

The 19mm Studio Kit replaces the 19mm Arri-Style Base on the RED One and includes the Hybrid Body Core and two 19mm Studio spacing clamps.

$ 49.00/day

  
Element Technica EVF Mount

[ + enlarge ]

The EVF Mounting System provides a secure mounting interface on either style of top bracket as well as 4" of vertical adjustment and 6" of telescoping adjustment along the viewfinder axis. In addition to the linear adjustment, it also provides a rugged clutch that allows the viewfinder to be tilted to almost any angle. It will stay where you put it regardless of shooting environment. All adjustments including clutch drag are easily adjusted on-the-fly without tools.

***NOTE***
When the Element EVF tube mount is being used, the Element Handle Risers are required for using the RED Handle Extension. The Red Handle can be used in conjunction with the tube mount without the risers but the handle extension cannot be used.

$ 49.00/day

  
Element Technica EVF Extension

[ + enlarge ]

Element Technica has created a companion product for our popular EVF Mount which finally adds gear head and dolly functionality. Our eyepiece extension lengthens the distance between our EVF Mount clutch and the EVF for the RED One. It is fully compatible with the ARRI telescopic leveling rod and allows the EVF to maintain a constant tilt angle even during extreme tilting of the camera. Installation is tool-less and only takes seconds.

$ 29.00/day

  
Element Technica Arri Dovetail 2060

[ + enlarge ]

Element Technica has improved the Arri standard dovetail by modifying the
outside edge to match the top of the OConnor fluid head. This feature allows
you to eliminate the OConnor release plate thereby eliminating an extra
interconnect while reducing the stack height.

Element's Arri / O'Connor style
dovetail is compatible our 15MM and 19MM RED bridge plates (available
through RED.com), our Hybrid system, and all other Arriflex standard bridge plates.

$ 39.00/day