Select a Brand ▼

DJI

Creativity is at the heart of every dream. Every idea, every groundbreaking leap that changes our world starts with the vision of talented creators. At DJI, we give these creators the tools they need to bring their ideas to life.

Our platforms empower them to capture images that were once out of reach. Our flying and camera stabilization systems redefine camera placement and motion. Amazing photos and video, treasured personal memories, and high-end professional imagery are captured every day, in every corner of the world using DJI products.

  
DJI Ronin 2 3-Axis Handheld/Aerial Stabilizer

The versatile Ronin 2 gimbal from DJI is suitable for use either handheld or mounted in a variety of ways including onto a drone, Steadicam, vehicle mount, and more. An update from the original Ronin, this motorized stabilization system is suitable for a range of camera and lens configurations, boasting a payload capacity of 30 pounds. This means it can be used for everything from DSLRs up to cinema cameras such as the ARRI ALEXA Mini or Sony FS7.

Like its predecessor, the Ronin 2 features support for underslung, upright, and briefcase operation modes to help you achieve the best angle. However, it has been redesigned to enable easy transition between upright and underslung modes without changing the position of the camera. It also offers several other improvements, such as enhancements to the control software and physical design to simplify taking complex shots without sacrificing performance, all while making important functions more readily accessible.

With up to eight times more powerful motors than previous iterations, Ronin 2 can withstand sustained speeds of over 75 mph with camera builds as heavy as 30 pounds. Thanks to encoded motors and enhanced precision, the Ronin maintains the same 0.02 of accuracy of its predecessors.

A detachable grip allows the Ronin 2 to stand up on its own, and is easily separated when the lower part of the handgrip is not needed. In addition to handheld work, the Ronin 2 supports mounting on cable cams, drones, Steadicams, vehicle mounts, and more.

A dedicated high-brightness touchscreen for settings and adjustments has been integrated into Ronin 2, streamlining and accelerating gimbal setup. Tactile buttons including motor pause are placed easily within reach.

Two batteries on Ronin 2, and the ability to run with only one, allows for batteries to be charged and swapped without interrupting a shoot.

Compatible Cameras
The Ronin 2 supports a range of cameras from DSLRs to cinema cameras, even with high-grade lenses and other accessories mounted. Compatible camera/lens configurations include:
RED DRAGON
Angenieux Optimo Anamorphic 6-152 A-2S
ARRI Master Prime lenses up to 150mm
ARRI Master Anamorphic lens
Canon CN7x17 KAS S 17-120mm T2.95
ARRI ALEXA Mini
Angenieux Optimo Anamorphic 56-152 A-2S
ARRI Master Prime lenses up to 150mm
ARRI Master Anamorphic lens
Canon CN7x17 KAS S 17-120mm T2.95
Blackmagic URSA Mini
Angenieux Optimo Anamorphic 56-152 A-2S
ARRI Master Prime lenses up to 150mm
Fujinon ZK19-90mm T2.9
Canon CN7x17 KAS S 17-120mm T2.95
Canon C300
Canon CN7x17 KAS S 17-120mm T2.95
Canon CN-E Prime lenses
Canon EF lenses up to 400mm
Zeiss Compact Zoom lenses
Sony FS7
Sony CineAlta 4K lens series
E-Mount lenses
ARRI Ultra Prime lenses
A-Mount lenses up to 300mm f/2.8G II


Includes: Two batteries installed and Two spare
(We recommend additional batteries @ $35 each

More Details...


QTY:

$ 349.00/day

Add to Quote

  
DJI Focus Handwheel 2 for Inspire 2 and Osmo Pro/RAW Cameras

Take control of your filmmaking with the Focus Handwheel 2 for Inspire 2 and Osmo Pro/RAW Cameras from DJI. Version 2 of the DJI Focus Handwheel gives you the ability to precisely control your camera's focus, aperture, and zoom.

Note: The DJI Focus Handwheel 2 Remote Controller Stand is required if using the Handwheel 2 with the Inspire 2 drone. Also, the Focus Handwheel 2 is not compatible with the Inspire 2 RC CAN Bus Cable.

Note: The DJI Osmo Pro/RAW Handwheel 2 Communication Cable is required if using the Handwheel 2 with the Osmo.

More Details...


QTY:

$ 39.00/day

Add to Quote

  
DJI Ronin-S Handheld 3-Axis Gimbal Stabilizer

Product Highlights
Three-Axis Motorized Gimbal Stabilizer
Holds DSLR or Mirrorless Cameras
Eight-Pound Payload Capacity
Trigger and Mode Buttons for Control
Offset Roll Motor for Screen Visibility
One-Handed Operation
Battery Grip Lasts up to 12 Hours
Camera Control via Included Cables
Includes Focus Wheel
Additional Functions via Android/iOS App

More Details...


QTY:

$ 79.00/day

Add to Quote

  
DJI Ronin-MX 3-Axis Gimbal Stabilizer

You may arrive early with camera and lens to prep, balance and familiarize yourself with equipment.

Built to Perform
A redesigned structure moves the Ronin-MX battery from the back to the front. This centers the weight of the camera, minimizing instability when flying directly forwards. It also dramatically increases the Ronin's agility and ability to handle rapid movements or high-G situations.

Magnesium Construction
Built extensively of lightweight magnesium, the Ronin-MX weighs just 6.11lb (2.77kg). This lightness allows it to be mounted to the M600 even when equipped with cameras as advanced as the RED EPIC, and to vehicles with a minimum impact on vehicle handling.

Strengthened Motors and ESCs
A combination of stronger motors and ESCs makes the Ronin-MX 50% more powerful than the Ronin-M. This additional stiffness and power allows the system to better withstand wind resistance when mounted to moving vehicles and aircraft, as well as more rapid movements.

External Camera Battery
Cameras such as the RED EPIC need an external battery for power. A dedicated position designed for an optional battery plate provides an easy, cable free mounting point for a 2nd DJI Intelligent Battery. This provides two 12V P-tap power sources for powering cameras and accessories.

Remote Focus Control
The DJI Focus uses DJI's expertise in brushless motors for previously unheard of levels of precision and accuracy. The brushless motor puts just 0.02 of accuracy in the hand so that turning the remote is just like turning the lens itself. It also features high torque and a fast reaction speed so that subjects can be kept in focus no matter how they move. When upgraded with a Focus Expansion Module, the Focus can control aperture or focus across Lightbridge 2's 3.1miles (5km).

Precision Solo Camera Control
Simple to set up and use, the DJI Ronin Wireless Thumb Controller makes controlling the Ronin-MX easy and intuitive, enabling the capture of shots that would otherwise be impossible for a single operator.

Solo Mode with Optional Thumb Controller
The separately available Ronin Wireless Thumb Controller makes controlling the Ronin-MX easy and intuitive, enabling the capture of shots that would otherwise be impossible for a single operator.

2nd Operator Control
A wireless 2.4GHz remote controller is included with the Ronin-MX enabling a 2nd operator to remotely control pan, tilt, roll, and other functions. By using the optional Lightbridge 2 Remote Controller, you have long range control of the Ronin-MX up to 3.1 miles (5km).

Fast, Precise Balancing
Save time and start shooting professionally stabilized video in under five minutes. Mount your camera to the Ronin-MX, quickly balance it, and then tap a button. The upgraded ATS (Auto Tune Stability) technology is more precise than before and completes the tuning and balancing processes with no tools necessary.

Cinematic Smoothness
Even with only one operator, SmoothTrack™ technology ensures the Ronin-MX translates movements into smooth camera angle changes. SmoothTrack™ settings from speed to deadband to acceleration are fully customizable. A 'Single Axis Follow Mode' enables two axis to be locked while SmoothTrack™ guides the camera along only one axis of motion.

Built-In Power Distribution
A dedicated power distribution box keeps wiring to a minimum while providing power to essential accessories. Two regulated 12V P-taps, one 500mAh full-size USB connector, and a DJI Lightbridge connector enable connectivity and power to everything a film maker needs.

Flexible Modes of Operation
Three modes of operation, found on all Ronin series products, make the Ronin-MX a powerfully flexible camera stabilization system. Underslung Mode is the most common shooting mode, with the Ronin-MX held in front of the user. Upright Mode reverses Underslung Mode and puts the camera higher up making it ideal for raised shots above people or through sunroofs. Briefcase Mode makes it a narrow platform that fits easily through narrow hallways and doors.

Universal Mounting
Mount the Ronin-MX to aircraft easily using a specially designed mounting plate. A separate universal Quick Release system that doubles as a vibration dampening system allows the Ronin-MX to be connected to everything from jib to tripod and anything in between. This plate isolates the Ronin-MX from unwanted vibrations coming from the platforms it is mounted to, and makes it usable everywhere.

Short Range Wireless Transmission
On the ground, the SRW-60G* allows film makers to see the image from the camera without running cables up the Ronin-MX. In the air, it sends the camera's feed from the camera direct to Lightbridge 2 allowing it to stream this image down to the pilot and cinematographer.

***** IMPORTANT NOTICE: *****
All gimbal devices (Ronin and Movi) require familiarization with the delicate and tricky balancing procedures as well as practice operating them once the complex balance has been achieved. Keep in mind that even the zooming of a lens can alter the balance.

In the beginning, it is recommended that you spend time as much time as possible practicing moves before your shoot. Remember to keep your shots efficient and short or the rig will become "heavy" to you sooner rather than later!

You may practice at Budget Video's facilities and we will give you a free shoot tutorial. Longer classes are sometimes available at a modest cost. Ask your account executive for details.

THERE ARE NO REFUNDS ON GIMBAL RENTALS


Note:*SRW-60G is not permitted for use on aerial platforms in North America.

CAMERA NOT INCLUDED

More Details...


QTY:

$ 149.00/day

Add to Quote

  
DJI Osmo Handheld 4K Camera and 3-Axis Gimbal

The Osmo system from DJI combines the Zenmuse X3 camera/gimbal with a detachable handle, bringing the benefits of stabilized 4K shooting to a handheld form factor. The camera features a 1/2.3" CMOS sensor that enables up to full DCI 4K (4096 x 2160) video recording at 24 or 25p as well as 12MP photo capability. Basic controls for the camera and gimbal are provided on the handle itself, including a joystick for manual pan and tilt. For monitoring and more advanced operation, there is a Wi-Fi link allowing Osmo to be tethered to a mobile device running the DJI GO iOS and Android app. An included smartphone holder effectively turns your smartphone into an on-board monitor. The Wi-Fi features a range of up to 85', so you can operate the camera and gimbal remotely as well.

Providing a grip for easy handheld operation, the handle incorporates a joystick for panning and tilting the gimbal. There is also record start/stop button and a shutter button, putting the essential controls right at your fingertips. A trigger allows you to toggle modes. The camera/gimbal assembly can detach from the handle for storage or use in other applications.

Features:
- 1/2.3" CMOS Sensor
- 4K (4096 x 2160) Video at 24 or 25p
- 120 fps Full HD Video for Slow-Motion
- 12MP JPEG or DNG RAW Still Photos
- Handle with Camera and Gimbal Controls
- Wi-Fi For Monitoring / Remote Operation
- Detachable Smartphone Holder
- Photos Bursts at up to 7 Shots
- Regular and Moving Time-Lapse Modes
- Auto and Selfie Panorama Modes

More Details...


QTY:

$ 99.00/day

Add to Quote

  
DJI Ronin 3-Axis Brushless Gimbal Stabilizer

You may arrive early with camera and lens to prep, balance and familiarize yourself with equipment.

The Ronin 3-Axis Brushless Gimbal Stabilizer from DJI is a camera stabilization system designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake. Suitable for most camera types and configurations up to 16 pounds, Ronin uses brushless motors that work on three axes: one for side-to-side "roll" - keeping the horizon level - one for tilt, and one for pan. The system is computer-controlled and boasts a precision of control of 0.02. An IMU (inertial measurement movement) detects movement and engages the motors to react, using algorithms to differentiate between intentional movement such as pans and tracking shots from unwanted shake. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support systems unsuitable.

The Ronin supports dual-operator shooting, much like working with a jib that has a motorized pan/tilt head. In this mode, a second operator would use the included transmitter (radio controller) to manually control camera pan and tilt independently of which way the Ronin moves. The included transmitter/receiver system operates on 2.4 GHz and is proprietary. If you prefer to use a third-party transmitter there is a D-Bus port on the Ronin to install your own receiver.

Product Highlights:
- Supports Cameras up to 16 Pounds
- Precision of Control: 0.02
- Transmitter for Remote Pan/Tilt Control
- Tool-Less Balance Adjustment System
- Assistant Software for iOS and Windows
- Bluetooth Wireless Interface for Setup
- 15mm Rods + Mount Points for Accessories
- USB and PowerTap Power Outputs
- Gimbal Tuning Stand Included
- Included Hard Case Holds Gimbal and More

Specifications:
- Weight: 9.3 lb / 4.2 kg
- Maximum camera dimensions: depth at center of mass on camera base plate: 5.5" / 140 mm, height measured from top of camera base plate: 8.9" / 225 mm, width: 7.7" / 195 mm
- Maximum payload: 16 lb / 7.3 kg

DJI Ronin Package Includes:
- DJI Ronin
- (4) DJI Batteries
- Battery charger

***** IMPORTANT NOTICE: *****
All gimbal devices (Ronin and Movi) require familiarization with the delicate and tricky balancing procedures as well as practice operating them once the complex balance has been achieved. Keep in mind that even the zooming of a lens can alter the balance.

In the beginning, it is recommended that you spend time as much time as possible practicing moves before your shoot. Remember to keep your shots efficient and short or the rig will become "heavy" to you sooner rather than later!

You may practice at Budget Video's facilities and we will give you a free shoot tutorial. Longer classes are sometimes available at a modest cost. Ask your account executive for details.

THERE ARE NO REFUNDS ON GIMBAL RENTALS

*CAMERA NOT INCLUDED

TV Logic 5.6 Monitor available for $99

ASSISTANTS AND OPERATORS ARE AVAILABLE

play video Watch video...


More Details...


QTY:

$ 249.00/day

Add to Quote

  
DJI Zenmuse X5R Gimbal Camera

PRODUCT HIGHLIGHTS

DJI Zenmuse X5R Gimbal Camera
Records Smooth 4K CinemaDNG Raw Videos
Wide-Angle 15mm f/1.7 MFT Lens
DJI Osmo Handle and Adapter for X5R
Smartphone Mount for Monitoring
Includes Universal Mount for Accessories
M-15 FlexiMic Microphone
Includes 4 Batteries and Charger
Includes Hard Case

More Details...


QTY:

$ 249.00/day

Add to Quote

  
DJI Osmo Z-Axis for Zenmuse X3 Gimbal and Camera

PRODUCT HIGHLIGHTS

Reduces Vertical Shake When You Walk/Jog
Spring-Loaded Arm
Supports Z3 On Top and Handle On Bottom

More Details...


QTY:

$ 29.00/day

Add to Quote

  
DJI RS3 Pro Gimbal Stabilizer

The DJI RS3 Pro Gimbal Stabilizer Combo has been redesigned to be sleeker and more powerful than the Ronin RS 2 gimbal, with its carbon fiber body weighing only 3.3 lb and a payload of up to 10 lb. This compact gimbal is tough enough to support and stabilize midsize cameras such as the Sony FX6 or Canon C70 with a 24-70mm zoom lens attached. With a larger full-color OLED display, a new fine-tuning knob, and greater stability, the RS 3 Pro can become an essential part of your professional camera kit. The Combo kit includes additional essentials such as an updated focus motor, a motor rod mount kit with gear strip, a briefcase handle, a BG30 grip, a lower extended quick release plate, a wireless Ronin Image Transmitter, a phone holder, USB multicamera control cables, multiple HDMI cables, power cables, and a lens-fastening strap.

Features
- DJI RS 3 Pro Gimbal Stabilizer
- Hard-Shell Case with Custom Foam
- BG30 Grip, Briefcase Handle, Cables
- RS Focus Motor, Gear, Rod Mount Kit
- Ronin Wireless Image Transmitter
- Quick Release Plate, Lens Support
- Extended Grip/Tripod

More Details...


QTY:

$ 129.00/day

Add to Quote
 


We accept major credit cards with 
          PayPal