The Teradek Bolt Pro Wireless 1080p60 SDI Monitoring Transmitter & Receiver wirelessly transmits an uncompressed HD video signal in up to 1080p60 4:2:2 as far as 300 ft with zero delay. The receiver features two 3G-SDI outputs for dual monitoring. One of these can be used to pass the video signal to an optional Teradek Cube Encoder, which will stream the signal even further on by WiFi or Ethernet, although only in up to 1080p30.
The Bolt Pro transmitter has a looping SDI output for local monitoring, a 70 minute internal battery, and can connect to more than one receiver in order to multiply the outputs.
Wireless 1080p60 4:2:2
The Bolt Pro Transmitter and Receiver set can wirelessly transmit 1080p60 4:2:2 up to 300 ft with zero delay.
1 TX to Multiple RX
A second and even more than two receivers can be added into the setup. One Bolt Pro transmitter can transmit full 1080p60 HD video to multiple receivers simultaneously. Bolt receivers have dual 3G-SDI outputs, which can connect to field monitors, switchers, and also Teradek Cube Encoders.
WSDI Pro Connectivity
Bolt transmits uncompressed video using WSDI Pro, which provides a wireless range of up to 300 ft and can coexist with other wireless equipment by dynamically adjusting the frequency bands used in real time. Bolt Pro transmitters have loop-through SDI outputs that you can connect to local monitors or recorders.
Internal Battery / P-Tap / Lemo DC for External Batteries
The transmitter has an internal 70 minute battery and a P-tap input for connecting to camera batteries. An AC power supply is included for the receiver. The transmitter and receiver each also have a Lemo DC input for connecting external V-mount or Gold-mount batteries.
The transmitter has a milled aluminum body, and the receiver has an ABS plastic body. Both the transmitter and receiver have 1/4" mounting threads and can be attached right onto or next to the equipment you'll be using them with.
1x SD/HD/3G-SDI input
1x looping 3G-SDI output
Resolutions: Up to 1080p60
Wireless Range: Up to 300 ft (91 m)
Power: Low power: ~4.5 W
Lemo 6 - 16 V DC input
Rechargeable lithium-ion battery with 70 minute run time
Chargeable over mini USB port or DC input
Chassis: Milled aluminum
Mount Type: 1/4"-20 threads
Operating Temperature: 32 to 122F (0 to 50C)
Dimensions: 2.3 x 4.3" (5.8 x 11 cm)
Weight: 0.4 lb (0.2 kg)
Connections: 2x SD/HD/3G-SDI outputs
Resolutions: Up to 1080p60
Power: Low power: ~6 W
Lemo 6-28 V DC input
Chassis: Durable ABS plastic
Mount Type: 1/4"-20 through-hole
Dimensions: 2.95 x 4.3" (7.5 x 11 cm)
Rent a Teradek Bolt Pro Wireless 1080p60 SDI Monitoring Transmitter in Miami or have it shipped worldwide