You may arrive early with camera and lens to prep, balance and familiarize yourself with equipment.

Built to Perform
A redesigned structure moves the Ronin-MX battery from the back to the front. This centers the weight of the camera, minimizing instability when flying directly forwards. It also dramatically increases the Ronin's agility and ability to handle rapid movements or high-G situations.

Magnesium Construction
Built extensively of lightweight magnesium, the Ronin-MX weighs just 6.11lb (2.77kg). This lightness allows it to be mounted to the M600 even when equipped with cameras as advanced as the RED EPIC, and to vehicles with a minimum impact on vehicle handling.

Strengthened Motors and ESCs
A combination of stronger motors and ESCs makes the Ronin-MX 50% more powerful than the Ronin-M. This additional stiffness and power allows the system to better withstand wind resistance when mounted to moving vehicles and aircraft, as well as more rapid movements.

External Camera Battery
Cameras such as the RED EPIC need an external battery for power. A dedicated position designed for an optional battery plate provides an easy, cable free mounting point for a 2nd DJI Intelligent Battery. This provides two 12V P-tap power sources for powering cameras and accessories.

Remote Focus Control
The DJI Focus uses DJI's expertise in brushless motors for previously unheard of levels of precision and accuracy. The brushless motor puts just 0.02 of accuracy in the hand so that turning the remote is just like turning the lens itself. It also features high torque and a fast reaction speed so that subjects can be kept in focus no matter how they move. When upgraded with a Focus Expansion Module, the Focus can control aperture or focus across Lightbridge 2's 3.1miles (5km).

Precision Solo Camera Control
Simple to set up and use, the DJI Ronin Wireless Thumb Controller makes controlling the Ronin-MX easy and intuitive, enabling the capture of shots that would otherwise be impossible for a single operator.

Solo Mode with Optional Thumb Controller
The separately available Ronin Wireless Thumb Controller makes controlling the Ronin-MX easy and intuitive, enabling the capture of shots that would otherwise be impossible for a single operator.

2nd Operator Control
A wireless 2.4GHz remote controller is included with the Ronin-MX enabling a 2nd operator to remotely control pan, tilt, roll, and other functions. By using the optional Lightbridge 2 Remote Controller, you have long range control of the Ronin-MX up to 3.1 miles (5km).

Fast, Precise Balancing
Save time and start shooting professionally stabilized video in under five minutes. Mount your camera to the Ronin-MX, quickly balance it, and then tap a button. The upgraded ATS (Auto Tune Stability) technology is more precise than before and completes the tuning and balancing processes with no tools necessary.

Cinematic Smoothness
Even with only one operator, SmoothTrack™ technology ensures the Ronin-MX translates movements into smooth camera angle changes. SmoothTrack™ settings from speed to deadband to acceleration are fully customizable. A 'Single Axis Follow Mode' enables two axis to be locked while SmoothTrack™ guides the camera along only one axis of motion.

Built-In Power Distribution
A dedicated power distribution box keeps wiring to a minimum while providing power to essential accessories. Two regulated 12V P-taps, one 500mAh full-size USB connector, and a DJI Lightbridge connector enable connectivity and power to everything a film maker needs.

Flexible Modes of Operation
Three modes of operation, found on all Ronin series products, make the Ronin-MX a powerfully flexible camera stabilization system. Underslung Mode is the most common shooting mode, with the Ronin-MX held in front of the user. Upright Mode reverses Underslung Mode and puts the camera higher up making it ideal for raised shots above people or through sunroofs. Briefcase Mode makes it a narrow platform that fits easily through narrow hallways and doors.

Universal Mounting
Mount the Ronin-MX to aircraft easily using a specially designed mounting plate. A separate universal Quick Release system that doubles as a vibration dampening system allows the Ronin-MX to be connected to everything from jib to tripod and anything in between. This plate isolates the Ronin-MX from unwanted vibrations coming from the platforms it is mounted to, and makes it usable everywhere.

Short Range Wireless Transmission
On the ground, the SRW-60G* allows film makers to see the image from the camera without running cables up the Ronin-MX. In the air, it sends the camera's feed from the camera direct to Lightbridge 2 allowing it to stream this image down to the pilot and cinematographer.

***** IMPORTANT NOTICE: *****
All gimbal devices (Ronin and Movi) require familiarization with the delicate and tricky balancing procedures as well as practice operating them once the complex balance has been achieved. Keep in mind that even the zooming of a lens can alter the balance.

In the beginning, it is recommended that you spend time as much time as possible practicing moves before your shoot. Remember to keep your shots efficient and short or the rig will become "heavy" to you sooner rather than later!

You may practice at Budget Video's facilities and we will give you a free shoot tutorial. Longer classes are sometimes available at a modest cost. Ask your account executive for details.

THERE ARE NO REFUNDS ON GIMBAL RENTALS


Note:*SRW-60G is not permitted for use on aerial platforms in North America.

CAMERA NOT INCLUDED

QTY:

−+

$ 149.00/day

Add to Quote

You may also want:

Ready Rig GS Stabilizer Kit

[ + enlarge ] Use the Ready Rig GS Stabilizer to transfer the weight of a gimbal-mounted camera away from an operator's arms and shoulders. By redistributing the load to the user's hips and core, this rig enables you to extend your shooting time and lessens operator fatigue. It also reduces the bounce motion sometimes seen when doing handheld gimbal shots. The Ready Rig GS works with any gimbal in standard or underslung mode. The Ready Rig GS features a load capacity range of 1 to 30 pounds, carbon fiber support arms, and an aluminum frame. Its slim, compact profile suits it for use in tight spaces and car interior shots. A soft, zippered carrying case is included with this kit. The entire gimbal stabilizer vest can easily fit through a standard doorway allowing the operator more freedom of movement on set and less bumping into things. Features: - Supports any gimbal/camera rig from 1-30 pounds - Provides vertical axis stabilization while reducing operator fatigue - Slim, lightweight design with carbon fiber support arms and aluminum components - Operate gimbal in over- or under-slung configuration - A soft, zippered carrying case is included in the kit More Details... QTY: −+ $ 149.00/day Add to Quote

*Disclaimer:
Photos are for illustration only. Prices do not include
optional accessories or extra equipment that may be shown.