Rent Follow Focus

  
Tilta Nucleus-M Wireless Lens Control System

[ + enlarge ]

The Tilta Nucleus-M Wireless Lens Control' System features a 1000' transmission range and comes with two lens drive motors with built-in wireless receivers, a FIZ hand controller, and two handgrips-one to control focus, and the other iris and zoom. The lens drive motors each feature a cine standard 0.8 MOD drive gear and two 7-pin connectors, enabling you to freely swap or interchange each motor. The motors power by daisy-chaining using the 7-pin cables, and each motor includes a 19mm rod clamp with 19 to 15mm reducing bushing.

The FIZ hand controller allows you to control focus, iris, and zoom, and it includes a neck strap. The handgrips feature adapters that enable mounting the controllers onto ARRI-compatible rosettes or onto 25/30mm diameter rods, such as those used with gimbals. The system comes packed in a waterproof hard case that protects your gear during transport and storage.

- The system features three ranges: low, medium, and high. It supports up to 15 channels to select from, and the controllers pair with each motor via the motor ID.

- The FIZ hand unit can control three channels (focus, zoom, and iris), as well as override the handgrips.

- The motors can calibrate on lenses with or without hard stops, such as a photo lens with follow focus gears.
The motors feature cine standard 0.8 MOD 32 pitch drive gears. Each motor includes a 19mm rod clamp and a 15 to 19mm adapter bushing, allowing you to mount the motors onto either a 15mm or 19mm rod.

- The motors power from a D-Tap connector, and then pass power by daisy-chaining via the 7-pin connectors with the included cables.

- The FIZ hand controller and each handgrip power via two 18650 3000mAh, 3.7V Li-ion batteries.
The batteries in the FIZ hand controller will last for more than 10 hours, and up to 48 hours in each handgrip, when idle.

  
Arri FF4 Follow Focus

[ + enlarge ]

Easy markings on the Focus scale offers you control for your focus points. Focus marks on video lens have a rotating angle of approximately 110° - 144° on the lens. The Studio Rig/Follow Focus system spreads this angle to approximately 2 - 2.5 times on the handwheel. Includes whip and right side.

  
Chrosziel Follow Focus 203-01

[ + enlarge ]

The Chrosziel 203-01 is a follow focus designed for film and video cameras. The unique system allows easy operation from both sides, making it highly accessible in a variety of situations. The follow focus makes critical focus pulling a breeze.

Markings on the focus wheel give about 110-140° of rotation on the lens, spreading the angle to the focus knob by a factor of two. Precision focus pulling cannot only be achieved with remarkable accuracy; it can also be recreated over and over with very little deviation from take to take. The kit comes with all necessary parts, including a removable hand wheel, focus level, and wheel scale.

  
ARRI WCU-4 Wireless Compact Unit for 3-Axis Lens Camera Control

[ + enlarge ]

Price is for 1 motor. Please advise if you need more motors.

The ARRI WCU-4 Wireless Compact Unit is a 3-axis handheld controller featuring an integrated lens display. Control camera functions, focus, iris, and/or zoom from a distance, such as when shooting handheld or using a stabilizer, gimbal or crane. The WCU-4 is compatible with the ARRI ALEXA Mini, ALEXA Plus, and Studio cameras, and with ARRI UMC-4, SMC-1, EMC-1, and AMC-1 motor controllers. Camera functions are controllable for ARRI ALEXA Mini, Plus and Studio, and ARRI AMIRA when used with the UMC-4 motor controller.