Lifepower A2 L Power Pack 27,000mAh Backup Battery |
Charge your AC- and USB-powered devices with the A2 L Power Pack 27,000mAh Backup Battery from LifePower. The LifePower A2 L power pack sports a typical 3-prong wall outlet along with up to 120W of peak power to run notebooks, film-set lighting, guitar amplifiers, drones, and more. This feature lets you use nearly any device, using the power charger that came with your unit. To simultaneously charge smartphones or tablets, it also comes with a USB Type-A port that delivers up to 3A of current. This backup battery has a large, 27,000mAh (99.9Wh) capacity, which can be recharged in about 3 hours with the included DC-charger. An optional solar panel kit is available for recharging the internal lithium-ion battery while outdoors or during emergencies. In addition, the LifePower A2 L is built with a brushed aluminum chassis to help it survive drops and spills, and there's also a velvet carrying pouch supplied for protecting the exterior surface from scratches.
Features: - Compatible with AC-Powered Devices - 27,000mAh Battery Capacity - Rechargeable Lithium-Ion Battery - USB Type-A Female Charging Port - Up to 100W Continuous (120W Peak) Power - Compact Design
|
14v, 190 Watt Hour, 2 Battery Package |
(2) 14.8 volt, 190 watt hour Anton Bauer type batteries (1) Charger / power supply (2) 4-pin power cables
|
Anton Bauer Pro Pac 14 Battery |
Ni-Cd 14.4v, 65 watt hours
The Pro Pac is recognized by broadcasters and video professionals around the world as the ultimate professional video battery and is recommended for all applications. The premium low resistance Pro Pac cell is designed to deliver long life and high performance even under high current loads and the most adverse conditions.
|
Anton Bauer TrimPac 14 Battery |
Ni-Cd 14.4v, 45 watt hours
The TRIMPAC size and shape was developed in close collaboration with major camcorder manufacturers. Thin, flat and lightweight (less than half the width and almost half the weight of a ProPac), the powerful low resistance TRIMPAC is the economical professional choice and will operate a 25 watt camcorder and on-camera light for up to 45 minutes.
|
Anton Bauer HyTRON 50 Battery |
Ni-MH, 14.4v, 50 watt hours
The HyTRON 120 is a Nickel Metal Hydride (NiMH) battery. NIMH provides the highest energy density cells available. An on-board "Fuel Computer" is built-in to keep a constant vigil on the battery energy I/O, as well as critical operating characteristics and conditions.
|
Anton Bauer HyTRON 120 Battery |
Ni-MH, 14.4v, 120 watt hours
Ideal battery for the latest generation of HD equipment, providing extended runtimes of up to 5 hours on DVC format camcorders. The HyTRON 120 is a Nickel Metal Hydride (NiMH) battery. NIMH provides the highest energy density cells available. An on-board "Fuel Computer" is built-in to keep a constant vigil on the battery energy I/O, as well as critical operating characteristics and conditions.
|
Anton Bauer QR-EX3 Gold Mount for Sony PMW-EX3 Camera |
The Anton Bauer QR-EX3 is a mount for the Sony PMW-EX3 XDCAM EX camera. The mount attaches to the rear of the camera and holds both Dionic 90 and HyTron 50 Anton Bauer batteries. The battery pack not only provides additional power to the camera, but also acts as a counter-balance, making the camera easier to mount on one's shoulder.
|
Beillen 160 Battery |
Lithium-ion, 14.8v, 160 watt hours
Gold Anton Bauer Mount. Compatible with all professional video cameras using AB type batteries. Built-in 4-level LED power status display. Standard Power Tap connector.
|
Beillen 190 Battery |
Lithium-ion, 14.8v, 190 watt hours
Gold Anton Bauer Mount. Compatible with all professional video cameras using AB type batteries. Built-in 4-level LED power status display. Standard Power Tap connector.
|
JVC BN-V428U Battery |
Lithium-ion, 7.2v, 2800mAh
For extended operational time our 7.2V / 2800mAh lithium ion rechargeable battery is an excellent choice. This battery will provide approximately 4-hours of operational run time. For use with the HD100, HD110 camcorders.
(AS SPARE- Three are supplied with each camera rental)
|
Panasonic CGA-D54s Battery |
Lithium-ion, 7.2v, 5400mAh
For DVX100, DVX100A, DVX100B, HDX200.
(AS SPARE- Three are supplied with each camera rental)
|
Panasonic DE-A20B Battery Charger / AC Adaptor |
|
Sony NP-FW50 Battery for A7S, A7R |
Camera rentals INCLUDE 3 batteries. Choose this item if you need additional batteries.
Sony NP-FW50 Lithium-Ion Rechargeable Battery (1020mAh) fits Sony Alpha A7S, A7S II, A7R II
|
Sony NP-F970 L Series Camcorder Battery |
Lithium ion, 7.2v, 47.5 watt hours
for the PD150, PD170, DCRVX2100, HDR-FX1, HDR-FX7, HVR-Z1U, etc.
(AS SPARE- Three are supplied with each camera rental)
|
Sony BP-U60 Battery for EX1, EX3, FS7 |
Camera rentals INCLUDE 3 batteries. Choose this item if you need additional batteries.
Lithium-ion, 14.4v, 56 watt hours
The Sony BP-U60 is a lithium-ion battery designed for professional video shooting in both the field and the studio. This battery is equipped with the INFO function that communicates battery status data to the PMW-EX1, PMW-EX3 camcorders.
|
Sony BP-U30 Battery |
Lithium-ion, 14.4v, 23 watt hours
The Sony BP-U60 is a lithium-ion battery designed for professional video shooting in both the field and the studio. This battery is equipped with the INFO function that communicates battery status data to the PMW-EX1 camcorder.
|
Sony BC-U1 Battery Charger / AC Adaptor |
BC-U1 Battery Charger/AC Adaptor for BP-U30/U60 Lithium-ion Battery Packs.
|
Sony NP-1 Type 14.8v Battery |
Lithium-ion, 14.8v, 71 watt hours
IDX NP-L7S NP Style Lithium-ion Battery with 3 L.E.D. Power Indicator. Typical run time is 2.7 hours.
|
Sony BP-90 Type Battery |
Lithium-ion, 14.4v, 7200mAh
Camcorder Battery for SONY DSR-300, DSR-250P, PDW-F330L
|
Canon BP-975 Battery for C300, C500 |
Camera rentals INCLUDE 3 batteries. Choose this item if you need additional batteries.
This battery fits the Canon C300 and C500.
This DOES NOT fit the C300 MK II.
|
Canon BP-A60 Battery Pack For EOS C300 Mark II |
Camera rentals INCLUDE 3 batteries. Choose this item if you need additional batteries.
This battery fits the Canon C300 MK II.
|
Canon LP-E6 Battery for 5D Mk II, 5D Mk III, 7D |
ALL CANON Camera rentals INCLUDE 3 free batteries. Choose this item if you need additional batteries.
Canon LP-E6 Lithium-Ion Battery Pack (7.2V, 1865mAh) fits Canon EOS 7D Mark II, 7D, 5D Mark II, 5D Mark III, 5DS, 5DS R, 60D, 60Da, 70D, and 6D Cameras
|
Canon LC-E6 Charger for LP-E6 Battery Pack |
The Canon LC-E6 Charger for LP-E6 Battery Pack is designed for use with the for LP-E6 battery pack, which powers the Canon EOS 5D Mark II, 5D Mark III, 7D and 60D Digital SLR cameras. This unit can be used to charge a battery for these cameras from a standard electrical outlet. The charger operates on 100-240VAC power for worldwide use. Its 2-prong US plug goes directly into a wall outlet, so no power cord is required.
|
Canon BP-945 / BP-941 |
Lithium-Ion Battery Pack (7.2V, 6600mAh)
|
Anton Bauer 30/13v Battery Belt |
Anton Bauer 30/13 Switchable Battery Belt, 30 volts 4 AH or 13.2 volts 8 AH Output, with Internal Charger, 4 pin XLR & 2 pin Amphenol Connections.
|
30V Li-Ion Battery Belt |
Includes slow battery charger. Works with Arri Pocket Par
*** Take Enough Batteries! ***
|
30V NiCad Battery Belt |
Internal slow charger. Works with Arri Pocket Par
*** Take Enough Batteries! ***
|
12V NiCad Battery Belt |
Powers any 12 volt device
|
14v Two Battery Package (GOLD MOUNT) |
Each package includes: (2) 14 volt Gold Mount block batteries (1) Charger
Use this battery pack to power: - Kino Flo Kamio Ring Light - Litepanels LED Ringlite - Budget Video Pole Lite
|
14v Two Battery Package (V-Mount) |
Each package includes: (2) 14 volt V Mount block batteries (1) Charger
Use this battery pack to power: - Kino Flo Kamio Ring Light - Litepanels LED Ringlite - Budget Video Pole Lite
|
Lunchbox Battery, 12v + 24v |
|
G&M Dual Output Battery |
14.4V x 7 Amp Hour Block Battery
|
Anton Bauer Quad Charger / Power Supply |
This four position InterActive battery charger communicates with InterActive Anton Bauer batteries to provide a safe reliable and fast charge. The system extends the life of your batteries and eliminates old concerns of battery "memory". The Quad 2702 also functions as an adapter to power a camera from AC mains worldwide.
|
Beillen Dual V-Mount Battery Charger / Power Supply |
Model BLB-AN2E V-Mount (V Lock) 2 Position Simultaneous Portable Charger with Power Supply Input AC: 90-242VAC 47-63Hz Output Charging: 16.8V 2.6A Output DC: 15V 4.0A
|
Sony AC-500 12v DC Power Supply |
AC adapter to power professional Sony video cameras. It has video out, XLR microphone out, BNC video out, and a 14-pin camera input/output. AC 100/120/220/240 volt~50/60 Hz 120W. 12v DC Output.
|
Anton Bauer adapter for JVC HD100, HD110 |
This battery adapter allows you to mount Anton Bauer Gold Mount batteries directly onto the back of the GY-HD100. It not only extends the camera's runtime but also improves the camera's ergonomics by balancing the weight of the full size bayonet mount lenses used with this camera.
|
200 watt DC to AC Power Inverter |
12VDC input, (2) 115v AC outlets
|
500 watt DC to AC Power Inverter |
12VDC input, (2) 115v AC outlets
|
750 watt DC to AC Power Inverter |
12VDC input, (2) 115v AC outlets
|
1000 watt DC to AC Power Inverter |
12VDC input, (2) 115v AC outlets
* High surge capacity for products that require more power to start * High efficiency - converts virtually all the battery's available power to AC * Overload and over temperature shutdown * Over voltage protection (15.0 VDC) * Low voltage alarm (11.0 VDC) * Low voltage cut-out (10.5 VDC) * Max. continuous power: 1000 watts * 5 min. continuous power: 1200 watts * Surge capacity (peak): 2000 watts * AC output voltage: 115 VAC RMS +/-5% * AC output waveform: Modified sine wave * Optimum efficiency: 90% * No load current draw: < 0.3 A DC
|
1200 watt DC to AC Power Inverter |
12VDC input, (2) 115v AC outlets
Maximum efficiency: Approximately 87% No-load draw: < 0.6 amp Output Wave Form: Modified Sinewave Input voltage range: 10.5 -15.5 VDC Output voltage range: 110/120 VAC 60 Hz Low voltage alarm: 10.5 volts Low voltage shutdown: 10.0 volts auto reset Thermal shutdown: Yes, auto reset
|
1750 watt DC to AC Power Inverter |
12VDC input, (2) 115v AC outlets
* 1750 watts continuous, 3000 watt surge capability * Supports addition of external AC outlets * Includes ON/OFF remote switch * Dual LED displays for DC volts and amps * Heavy duty terminals for trouble-free battery connection * Low voltage alarm (10.7 VDC) * Over voltage protection (15.0 VDC) * Overload shutdown * Over temperature shutdown
|
Exide Prevailer Sealed Gel Battery |
Model PV-27DC. Group 27, 12 volt GEL VRLA marine battery. Use this battery when lots of battery power is required. Supplied with 4 pin XLR power for 12v, extra long battery cable for inverter operation. Battery charger included. Inverters available separately.
|
Anton Bauer CINE VCLX CA Dual Voltage Battery |
The Anton Bauer CINE VCLX CA is an advanced battery for film and video applications. This battery offers 28VDC cine and 14.4VDC video capabilities. It features Anton Bauer diagnostics, protection and a rugged case design. This version is a specialized battery for the Sony Cine Alta camera system.
Note! This battery can only be charged by the VCLX charger and needs the CA-GBC cable for charger connectivity.
Cine Alta The specialized CINE-VCLX-CA version is specifically designed for use with the Sony F-23 Cine Alta camera. This battery supplies both 28 and 14VDC on a single cable, via an 8 pin Lemo connector along with a single 28VDC 3-pin and a 14VDC 4-pin. Microprocessor The microprocessor accurately monitors energy distribution of the battery. Therefore, this battery "learns" it's own parameters and communicates with the charger for optimum performance. Dual Voltage This battery offers 28VDC cine voltage on a 3-Pin XLR and a 14.4VDC video voltage via 4-Pin XLR connectivity. Case Design The design of this case protects the cells from impact and transportation situations. Protection A low voltage cut-off of 12VDC protects the battery against electronic damage.
Product Highlights ■14.4V and 28VDC Output ■560 / 336 Wh ■Nickel Metal Hydride Technology ■4-Pin, 3-Pin XLR and 8-Pin Lemo ■Cine Alta Version
Size: 10.00 x 12.75 x 5.50 in (25.40 x 32.39 x 13.97 cm) Weight: 25.0 lbs (11.3 kg) (2) 4p XLR for 14.4v and (1) 3p XLR for 28v. Provides Dual simultaneous outputs (20 amps@ 14.4v ; 12 amps @28v) 14.4v and 28v 560Wh NiMH battery Integral digital features ON/OFF switch REALTIME display Compatible with CINE VCLX charger MAXX 1.5 Warranty
|
Pag PAGlink HC-PL94T Time Battery Gold Mount (14.8V, 94Wh) |
The capacities of all the units combine to provide a higher current draw and a longer run-time than if the individual units are used consecutively. A single unit supports a 10A draw while two units combine to provide a 12A draw. Multiple units can be attached together when being used and when being charged. They're compatible with PAG and Anton Bauer lithium ion chargers. Up to eight can be linked per channel on select PAG chargers and up to four on Anton Bauer chargers (up to six with the right firmware). They stop charging once topped-off so you can safely leave them on the charger rather than let them self-discharge on the shelf. Combined units form a network and communicate with one another to provide safe and efficient output. For example when two units that have the highest states of charge in the group are linked one to the other they are used as the ones to provide power to the camera while the remaining units in the group wait in stand-by. Combined packs support hot swapping for continuous power supply. The HC-PL94T is also capable of sending capacity data to all supporting cameras. The HC-PL94T features a numeric run-time and capacity display which maintains accuracy by tracking performance and adjusting calibration values to compensate for the aging of the cells. Run-time is expressed in hours and minutes and can be switched to a percentage figure. When linked for use run-time is displayed for the entire pack. When being charged each battery displays its individual status. The display characters can be changed at the press of a button for the character type more legible for you. The battery cells have no memory effect and are completely recyclable. The battery uses a fail-safe electronic system with an electrolyte-resistant coating on its protection circuit. The system features three over-current two over-voltage two under-voltage and three thermal safety shutdown systems including a non-resetting thermal fuse. To support a long working life the battery's front and rear contact assemblies are external to the battery case and can be replaced if damaged. PAGlink batteries are capable of working in temperatures as low as -20? The HC-PL94T is UN tested and is unrestricted in quantity by air transport legislation. You can carry as many with you on board as you can fit in your hand-luggage. The HC-PL94T can only be linked with other The HC-PL94T Gold Mount units
Product Highlights
High Current 14.8V, 94Wh, 6.4Ah Li-Ion Linkable with Other Units for More Power 10A Draw; 12A When Two Units Combined Numeric Run-Time and Capacity Display Display Accuracy Maintenance Feature No Memory Effect Fail-Safe Electronic System Communicates Data to Supporting Cameras High-Impact, Molded Polycarbonate Case Unrestricted Hand-Luggage Carry-On
|
Beillen Dual Gold Mount Battery Charger / Power Supply |
Model BLB-AN2E Gold mount 2 Position Simultaneous Portable Charger with Power Supply Input AC: 90-242VAC 47-63Hz Output Charging: 16.8V 2.6A Output DC: 15V 4.0A
|
Beillen Gold Mount Quad Li-ion Charger / Power Supply |
FEATURES Input: AC 90-240V, 47-63Hz Charger output: DC 16.8V 2.5A DC output: 15V 4.5A Dimensions: 231 x 141 x 104 mm In inches: 9" x 5.5" x 4.1" Weight: 5.9 lbs (2700 grams) Chemistry: Lithium-ion
Beillen BLB1703-AN4 is a four channel simultaneous Li-ion charger and DC adapter. When used as a DC adapter, it powers the camcorder directly via XLR connector. As battery charger, AN4 can recharge up to four Gold Mount type Li-ion batteries simultaneously.
|
Beillen V-Mount Quad Li-ion Charger / Power Supply |
FEATURES Input: AC 90-240V, 47-63Hz Charger output: DC 16.8V 2.5A DC output: 15V 4.5A Dimensions: 231 x 141 x 104 mm In inches: 9" x 5.5" x 4.1" Weight: 5.9 lbs (2700 grams) Chemistry: Lithium-ion
Beillen BLB1703-BP4E is a powerful charger and AC adaptor in one. It's a four channels, simultaneous Lithium-ion charger for professional V-Mount batteries, while as an AC adaptor it provides power to the camera via XLR.
|
Pro-X GP-TS V-Lock Mount Dual Battery Mount, Shark Fin |
|
Anton Bauer QR-HOTSWAPGM Hot-Swap Battery Plate "Shark Fin" |
The QR-HSGM is a Universal Hot-Swap battery mount. Utilizing the Gold Mount, battery-mounting system, the QR-HSGM can be attached to any portable device with an existing Gold Mount bracket. The "Hot-Swap" design allows the QR-HSGM to mount two fully charged *batteries simultaneously. Either battery can be changed-out for a fully-charged battery at any time. The QR-HSGM offers true perpetual power, by allowing the operator to "swap-out" a battery with low available capacity, with a fully charged battery, without having to power-down the equipment.
|
IDX Endura 50 Lithium Ion V-Mount Battery |
DC14.4V
|
IDX Endura 50 Lithium-Ion V-Mount Two Battery Package |
Includes 2 V-Mount batteries, a dual charger, and power supply cable.
|
Anton Bauer QR-SDH V-Mount to Gold Mount Adapter Plate |
QR-SDH mounts instantly to XDCam HD (2/3"), XDCam EX, SX, Digital BetaCam, Hi-Definition and IMX cameras to accept Anton/Bauer batteries.
|
Sony NP-FZ100 Rechargeable Lithium-Ion Battery (2280mAh) |
|
Quad Box Power Plug |
Cast aluminum 4 outlet stage box with basket strain relief Heavy Duty Leviton 5266C 3-Prong AC Plug 14/3 SJ heavy duty rubber-coated power cable Terminated in BR-15 (Brown) high impact receptables A serious power cable that can tour with heavy metal and come back still performing flawlessly
|
|