50% OFF SALE at Budget Video Rentals



Rent Misc Camera Support

  
Ready Rig GS Stabilizer Kit

Use the Ready Rig GS Stabilizer to transfer the weight of a gimbal-mounted camera away from an operator's arms and shoulders, load capacity up to 30lb

play video Watch video...


More Details...


QTY:

$ 149.00/day

Add to Quote

  
Cine Tape Measure

Measuring distance just became easier with the Cinematography Electronics CINE TAPE MEASURE System. This versatile ultrasonic system continuously calculates the distance between a subject and the camera's film-plane. By continuously measuring distance during a shot, small or subtle subject movements are no longer a problem. With non-stop measurements, focusing a camera lens is simplified which saves time, avoids retakes and reduces production costs.

The main components of our system are the CINE TAPE MEASURE CONTROL and the SENSOR ASSEMBLY. The control displays accurate distance measurements from the constant stream of data that is received by the sensors.

CINE TAPE MEASURE System is a small, rugged, lightweight, and quiet ultrasonic range finder. It is compatible with all lenses, film cameras and video cameras. In addition, it is easy to set up and use, making it the first choice of professional filmmakers.

Cine Tape Measure Control

The stylish Cinematography Electronics CINE TAPE MEASURE CONTROL is the brain of the system. It continuously computes the distance between the camera's film plane and the subject. A simple one-time Film-Plane offset adjustment programs the relationship of the film plane to the sensor position. When the control detects a subject, the green Sense LED glows and the calculated distance is shown on the LED display in either feet-inches or meters-centimeters. Adjustable brightness levels for the large red LED display offers comfortable viewing under different lighting conditions. The digital Sensitivity adjustment feature fine-tunes the system range, which is also helpful with different subject reflectivity. The Close Focus feature sets the minimum sense distance. Objects within this area are disregarded. All of the functions are set and stored digitally, which safeguards against accidental changes and provides accurate repeatability between units.

Sensor Assembly

The innovative Cinematography Electronics SENSOR ASSEMBLY consists of two small cone-shaped "horns," a miniature pan tilt mechanism, a mounting stud, and an electrical connector. The horns send and receive ultrasonic signals that are used to calculate the distance measurement. Mounting the SENSOR ASSEMBLY onto a camera package is simple with the combo stud. With its pan and tilt adjust/lock knobs, aiming the horns towards the subject is quick and straightforward. The SENSOR ASSEMBLY interfaces to the control via a short detachable Sensor Cable. A spring-loaded holder permits laser pens to be attached parallel to the sensors, providing a visual reference during calibration.

Specifications:

CINE TAPE MEASURE CONTROL

Size:Inch: 3.0 x 3.0 x 1.2 mm: 76 x 76 x 31
Weight:7 oz. (195 Grams)
Construction:Machined Aluminum (Not Cast)
Finish:Black Anodize, Engraved
Measurement Units:Feet & Inches or Meters & Centimeters
Measurement Resolution:1 inch; 1 cm
Film Plane Offset Range:-9 to 99 ft; -3 to 30 m
Close Focus Range:12 to 30 inch; 30 to 90 cm
Sensitivity Range:0 to 99 %
Sensitivity Adjustment:5 % Increments
Select / Adjust Switch:Red Knob
FT-in / M-cm Switch:Toggle
Power Connector:Fischer 3 Pin
Sensor Connector:Fischer 5 Pin
Remote Connector:Lemo 6 Pin
Numeric Display:Bright Red LED
Sense Indicator:Bright Green LED
Film-Plane Adjust Indicator:Bright Yellow LED
Sensitivity Adjust Indicator:Bright Yellow LED
Circuit Protection:Auto Reset Fuse
DC Power Requirements:9 to 32 Volts
Current Consumption:50 to 150 mA
Mounting:Velcro

Specifications:

SENSOR ASSEMBLY

Size:Inch: 3.5 x 5.4 x 3.6 mm: 88 x 137 x 92
Weight:6 oz. (170 Grams)
Construction:Machined Delrin and Aluminum
Sensor Connector:Fischer 5 Pin
Pan Rotation:360
Tilt Movement:180
Pan and Tilt Lock:Twist Lock Knob (2)
Mounting Hole:1/4-20 Threaded
Mounting Stud:3/8-16 Threaded
Mounting Diameter:5/8 inch, 15 mm, 19 mm

More Details...


QTY:

$ 295.00/day

Add to Quote

  
Kessler 3 foot CineSlider

The Kessler CineSlider is a heavy duty portable mini-dolly / linear slider system for camera rigs weighing up to 80 pounds. Weighing in at only 9 pounds, with a length of 40.5 inches, 5 inches wide, and a total camera travel distance or 35.5 inches, the CineSlider is a very portable solution to get those quick, smooth short-run dolly movements, without having to transport a large dolly system. Features include drag control and locking, handle with adjustable arc diameter for ultimate movement control, smooth rolling precision stainless steel ball bearing Delrin wheels, and multple mounting options.

The CineSlider can be center mounted flush to the optional Kessler Hercules 2.0 head to achieve panning and tilting movements, center mounted to a 100mm bowl tripod with the optional 100mm Ball Mount Kit, or support from both ends with a combination of a standard tripod / fluid head or lightstand or monopod.

Camera mounting options include the Quick Release Plate and Receiver that comes standard. Also included with the CineSlider is a 3/8" standard mounting bolt, for flat mounting a fluid head to the carriage.

Package Includes:
- 3 foot CineSlider
- Fluid Head
- Kessler Outrigger Feet

More Details...


QTY:

$ 99.00/day

Add to Quote

  
Kessler 5 foot CineSlider

The Kessler 5 foot CineSlider is a heavy duty portable mini-dolly / linear slider system for camera rigs weighing up to 80 pounds. Weighing in at only 12 pounds, with a length of 60.5 inches, 5 inches wide, and a total camera travel distance or 51 inches, the CineSlider is a very portable solution to get those quick, smooth short-run dolly movements, without having to transport a large dolly system

The CineSlider can be center mounted flush to the Kessler Hercules 2.0 head (mounts to 100mm or 75mm bowl tripod legs) to achieve panning and tilting movements, center mounted to a 100mm or 75mm bowl tripod with the optional Ball Mount Kit, or supported from both ends with a combination of a standard tripod / fluid head or lightstand or monopod. Due to the length of the 5 foot CineSlider, depending on the weight of your camera, you may need to support the unit on both ends with tripods, lights stands, etc, or set it on a flat surface. If setting on the ground, we recommend the Outrigger Feet (included in package) for the best support and stability.

Camera mounting options include the Quick Release Plate and Receiver that comes standard. Also included with the CineSlider is a 3/8" standard mounting bolt, for flat mounting a fluid head to the carriage.

Package Includes:
- 5 foot CineSlider
- Bogen 503
- Kessler Outrigger Feet

More Details...


QTY:

$ 119.00/day

Add to Quote

  
Kessler ElektraDRIVE 200 Motor w/ORACLE Controller

The elektraDRIVE Motor Pod is our interchangeable motor drive system for use with our sliders and other elektraDRIVE line of products.

The 200 Series motor is the suggested normal use motor for the CineSlider.

Approximate Dynamic Range for continuous movement at the lowest and highest motor speed settings.

Speed Range:
- 1 min 48 sec/ft (slowest)
- 2.4 sec/ft (fastest)

ORACLE Controller Supported Features:
- Now includes SmartLapse™ programmable motion control.
- Backlite LCD display with menu and setting values.
- Fully adjustable controls for Max Speed, Dampening, and Dead Band.
- Movement Recording / Memory Function with three memory banks.
- Time Lapse control
- Premium Multi-Function Joystick
- Joystick orientation can be easily set in the menu.
- Cabling is CAT5 / CAT6 cable with RJ45 connectors (standard network cable).
- Powered by standard AC power supply with wall plug, or optional 12v DC adapter and battery pack.

More Details...


QTY:

$ 99.00/day

Add to Quote

  
Kessler ElektraDRIVE 500 Motor w/ORACLE Controller

The elektraDRIVE Motor Pod is our interchangeable motor drive system for use with our sliders and other elektraDRIVE line of products.

The 500 Series motor is the suggested Time Lapse (slow) motor for the CineSlider and has the most torque.

Approximate Dynamic Range for continuous movement at the lowest and highest motor speed settings.

Speed Range:
- 3min 53 sec/ft (slowest)
- 3.9 sec/ft (fastest)

ORACLE Controller Supported Features:
- Now includes SmartLapse™ programmable motion control.
- Backlite LCD display with menu and setting values.
- Fully adjustable controls for Max Speed, Dampening, and Dead Band.
- Movement Recording / Memory Function with three memory banks.
- Time Lapse control
- Premium Multi-Function Joystick
- Joystick orientation can be easily set in the menu.
- Cabling is CAT5 / CAT6 cable with RJ45 connectors (standard network cable).
- Powered by standard AC power supply with wall plug, or optional 12v DC adapter and battery pack.

More Details...


QTY:

$ 99.00/day

Add to Quote

  
Kessler Revolution Pan/Tilt Head w/ORACLE Controller

The Kessler REVOLUTION Pan and Tilt System is our answer to the need for an affordable, quality motorized pan and tilt head. After two years of development, we have produced a motorized head that addresses the failings of other pan / tilt heads in this price range. When paired with the ORACLE Controller, we honestly feel the REVOLUTION is the most feature rich and best motorized head solution on the market.

REVOLUTION Head Features:
- Billet aluminum with stainless steel hardware construction.
- Dual motors for each axis, provide zero backlash and 100% holding power (no drifting).
- Superior Dynamic Range. Unit is both faster and slower than other heads at similar price point.
- Ball bearing and belt drive to eliminate gear to gear noise.
- Pass-through axle points, for easy cable routing.
- Cabling is CAT5 / CAT6 cable with RJ45 connectors (standard network cable). NO EXPENSIVE PROPRIETARY CABLES!!
- Unit Weight: 10 lbs.
- Weight Capacity: 20 lbs.

ORACLE Controller Supported Features:
- Now includes SmartLapse™ programmable motion control.
- Backlite LCD display with menu and setting values.
- Fully adjustable controls for Max Speed, Dampening, and Dead Band.
- Movement Recording / Memory Function with three memory banks.
- Time Lapse control
- Premium Multi-Function Joystick
- Joystick orientation can be easily set in the menu.
- Cabling is CAT5 / CAT6 cable with RJ45 connectors (standard network cable).
- Powered by standard AC power supply with wall plug, or optional 12v DC adapter and battery pack.

More Details...


QTY:

$ 149.00/day

Add to Quote

  
PROslider Camera Slider, 4 foot



More Details...


QTY:

$ 169.00/day

Add to Quote

  
PROslider Camera Slider, 6 foot



More Details...


QTY:

$ 199.00/day

Add to Quote

  
Glidetrack HD, 1 meter (DISCONTINUED)

The Glidetrack HD has been designed and tailor made for film-makers looking for heavy duty performance. A step above the SD model, the HD provides an even more rigid and stable foundation in order to cater for heavier camera/camcorder setups. The rail is of a heavier duty extrusion, which makes the HD perfect for mid size rigs that may include external monitors, matte boxes or support systems.

The Glidetrack HD is based on a heavy-duty 16mm rail with a 60mm wide slider car, and with wider feet than the SD to make it even more stable when used with depth of field adapters and camera setups featuring longer lenses.

At the heart of the Glidetrack system lies an industrial grade rail and bearing system. The rail is made of hard anodized aluminum and the bearings themselves are of industrial grade self lubricating plastic that makes them extremely insensitive to dirt and dust ingress and corrosion resistant, which cannot be said of traditional bearing systems. The bearings are extremely hard wearing and are rated to run for many thousands of kilometers of travel before needing replaced. Your elbow will wear out before they do!

Product Features
- Use it with a single or double-tripod set-up, or standalone on its custom-made scratch-free feet.
- The carriage can be locked in position using the small adjuster on the side of the carriage.
- Set-up is a matter of seconds, and then you're ready to shoot professional grade video.
- Crane type moves. By mounting your Glidetrack at one end, you can do pseudo crane moves on the fly.
- Inclined dolly moves, By using two tripod heads, you can do your Glide at an angle. Try that with a traditional dolly!

More Details...


Call for a Quote

  
Glidetrack SD, 20in (DISCONTINUED)

The Glidetrack SD is the original slider and is still one of the best sellers to date. The SD was designed and tailor-made for the new generation of video capable DSLRs as well as smaller prosumer camcorders.

Lightweight and portable with a small footprint, the SD easily complements your setup and offers you tremendous flexibility and diversity in your shoots. In addition, the ease of use combined with a quick set up speed means that the SD opens up new possibilities to videographers whilst on a shoot. Instead of just having a tripod, you suddenly have a creative goldmine at your disposal that will add high value shots to your production.

The Glidetrack SD is based on a 10mm rail with a 40mm wide slider car. It is light and strong capable of handling kit up to 4kg. The rail is made of hard anodized aluminum and the bearings themselves are of industrial grade self lubricating plastic that makes them extremely insensitive to dirt and dust ingress and corrosion resistant, which cannot be said of traditional bearing systems. The bearings are extremely hard wearing and are rated to run for many thousands of kilometers of travel before needing replaced. Your elbow will wear out before they do!

Product Features
- Use it with a single or double-tripod set-up, or standalone on its custom-made scratch-free feet.
- The carriage can be locked in position using the small adjuster on the side of the carriage.
- Crane type moves. By mounting your Glidetrack at one end, you can do pseudo crane moves on the fly.
- Set-up is a matter of seconds, and then youre ready to shoot professional grade video from your existing DSLR kit.

More Details...


QTY:

$ 39.00/day

Add to Quote

  
Manfrotto 595B Fig Rig Camera Stabilizer

After years of using the Fig Rig on his award-winning films, Mike Figgis brought his idea to Manfrotto. An idea that is non-traditional in design, but purely simple and effective. The only modular system in the world to smoothly support the DV camera and act as a frame to mount all the accessories including zoom controllers, mics, mixers, lights, monitors, arms... A circular frame with a crossbar to mount most mini DV cameras, the Fig Rig becomes part of the body to produce smooth, steady traveling shots. It is this very fact which is the secret to the Fig Rig. As the operator walks, his/her muscles and tendons absorb all the shocks, transferring only fluid movements to the camera. As there are no straps or harnesses attached to the Fig Rig, and quick and wide movements can be made within the same shot from ground-level to overhead, in one smooth movement. The camera, accessories and operator become one, allowing you to film scenes quickly and unobtrusively. With the Fig Rig your creativity is virtually limitless.

More Details...


QTY:

$ 39.00/day

Add to Quote

  
Bogen/Manfrotto 557B Video Monopod

Solid and stable three-section professional monopod featuring sure rubber grip, suction cup foot, quick-action leg locks, wrist strap, and 357 quick-release sliding camera plate adapter to adjust the camera's center of balance. Ideal for ENG style camcorders.

More Details...


QTY:

$ 29.00/day

Add to Quote

  
Noga Cine Arm DG Hold-It Arm

The Cine Arm DG Hold-It Arm from Noga is a 3-joint mounting arm with 1/4"-20 screws on both ends that allows you to attach accessories.

More Details...


QTY:

$ 9.99/day

Add to Quote

  
Articulating Arm, 7 inch

The Pearstone 7.5" Articulating Arm is an arm used to mount small displays or other accessories on DSLRs and professional camcorders.

More Details...


QTY:

$ 9.99/day

Add to Quote

  
Spider Pod Camera / Operator Riser

The Spider Pod, a portable tripod riser and standing platform, elevates a camera tripod and operator two feet. It is designed for professional videographers and filmmakers, and news crews who need to raise their camera's viewpoint, yet do it with speed and stability. The Spider Pod allows a camera operator to shoot above crowds and capture images that are stable and unobstructed.

Large staging risers are often used as camera platforms. However, as an operator shifts footing, the camera and tripod may shake producing an unstable video image. When multiple shooters are on these shaky staging risers or camera are zoomed in, the problem is magnified. The Spider Pod features a separate tripod riser and standing platform eliminating camera shake caused by the camera operator.

More Details...


QTY:

$ 195.00/day

Add to Quote

  
Easyrig 2.5, 300N (10 - 16 lbs)

Best for cameras between 10 and 16 pounds

More Details...


QTY:

$ 199.00/day

Add to Quote

  
Easyrig 2.5, 400N (15 - 21 lbs)

The Easyrig gives you the speed and mobility of a hand-held camera, while still achieving steady shots from the shoulder and hip. Specially designed suspension lines with shock absorbers accept the weight of your camera & redistribute the majority to your hips, where it is more efficiently supported. Easy rig is ideal for news broadcasts, sport events, documentaries, commercials or many other hand-held situations where stability is crucial and where freedom of movement is essential.
Best for cameras between 16 and 21 pounds

More Details...




Download:
Manual for the Easyrig 2.5 Camera Support System

QTY:

$ 199.00/day

Add to Quote

  
Easyrig 500N with Extended Arm (24 - 28 lbs)

The Easyrig 3 500N with Small Gimbal Rig Vest & 5" Extended Arm is a body-worn support system that is adjustable to support camera rigs weighing 24 to 28.5 lb. The system consists of the Easyrig 3 support bar with 500 N gas shock absorber, the small Gimbal Rig double shoulder vest, and a 5" Extended support arm.

More Details...


QTY:

$ 199.00/day

Add to Quote

  
Easyrig 700N with 5in Extended Arm (33 - 44 lbs)

The Easyrig Cinema 3 700N Gimbal Rig is a body-worn support system for camera operators working with handheld motorized gimbal rigs weighing 33 to 44 lb. The system works by using a suspension line to support the weight of the gimbal rig, taking the load off your shoulder, neck, and arm muscles, and distributing it across your torso. This lets you shoot for longer periods of time without worrying about arm fatigue.

More Details...


QTY:

$ 199.00/day

Add to Quote

  
Easyrig Vario 5 with Gimbal Rig Vest

Easyrig Vario 5 with Gimbal Rig Vest and Extended Arm

More Details...


QTY:

$ 249.00/day

Add to Quote

  
EasyRig 4 Vario

The EasyRig 4 Vario - 400 is a portable camera support with all the features of Cinema 3 (stabilizing camera support), and can be used with both film and video cameras. It weighs 8.6 lbs and supports cameras up to 40 lbs. The shock absorber allows for variable tension adjustments, and the support arm enables the handling a wide range of camcorder weights by simply turning a knob. The 4 Vario - 400 includes a vest, a hip belt, a lockable camera hook for safety, and comes with a Petrol carry bag.

Features:

Portable Camera Support
Includes Features of Cinema 3
Weighs 8.6 lbs
Load Capacity up to 40 lb
Variable Shock Absorber
Support Arm
Lockable Camera Hook
Ergonomically Designed
Reduces Strain on Neck & Shoulders

More Details...


QTY:

$ 199.00/day

Add to Quote

  
Microdolly Suction Camera Mount Kit

The Microdolly CAMERA SUCTION MOUNT is ideal to safely attach a camera on a moving vehicle, aircraft, train or boat. This innovative KIT uses three strong suction cups, six universal joint clamps and a set of three 12 inch and three 18 inch rods that connect in seconds to a camera plate to position a camera or light almost anyplace. A lighting spud and stainless steel safety cable are also included. The MOUNT weighs just six pounds. (3.5.kg) Total holding force is 200 pounds. (90kg) Maximum camera weight is 50 pounds. (22.5 kg)

IMPORTANT: Always Use safety straps on BOTH suction mount and gear!



More Details...


QTY:

$ 199.00/day

Add to Quote

  
Hostess Tray Camera Mount

Mounts a camera on the side of a car, truck, or other vehicle.

More Details...


QTY:

$ 99.00/day

Add to Quote

  
Hood Camera Mount

Mounts a camera on the hood of a car, truck, or other vehicle.

More Details...


QTY:

$ 99.00/day

Add to Quote

  
DV Rig Pro (shoulder brace)

This versatile shock-absorbing support for DV cameras adjusts to accommodate various body types, camera weights, and shooting styles. Fluid tilt and adjustable suspension enable smooth, mobile acquisition. Great for hand-held shooting. (Camera not included)

More Details...


QTY:

$ 79.00/day

Add to Quote

  
Cine Saddle - Large sizes

The Cinesaddle by Cinekinetic is filled with high tech foam balls that push the sides of the bag tight up against the camera and holds it rock steady. It also absorbs vibration, providing a very stable surface for the camera. Extremely lightweight and simple to set up.

Cinematographers use the Cinesaddle as a replacement for their tripod but it may also be used to attach your camera to any moving object.

More Details...


Options:

QTY:

$ 49.00/day

Add to Quote


  
Cine Saddle - Small sizes

The Cinesaddle by Cinekinetic is filled with high tech foam balls that push the sides of the bag tight up against the camera and holds it rock steady. It also absorbs vibration, providing a very stable surface for the camera. Extremely lightweight and simple to set up.

Cinematographers use the Cinesaddle as a replacement for their tripod but it may also be used to attach your camera to any moving object.

More Details...


Options:

QTY:

$ 39.00/day

Add to Quote


  
E-Slide Camera Slider, 3 foot

The E-SLIDE camera slider is a state of the art tool for motion picture. Precision linear bearings on case hardened steel rails make for smooth, effortless travel. The custom machining of the base and rail supports give the E-SLIDE incomparable rigidity and consistency.

The E-SLIDE comes in 3, 4 and 6 foot lengths. It mounts to any Mitchell base by way of a sealed bearing pan assembly that can be mounted in center or offset positions. The pan assembly can also be removed, providing a rigging friendly base that is also speedrail compatible.

More Details...


QTY:

$ 149.00/day

Add to Quote

  
E-Slide Camera Slider, 4 foot

The E-SLIDE camera slider is a state of the art tool for motion picture. Precision linear bearings on case hardened steel rails make for smooth, effortless travel. The custom machining of the base and rail supports give the E-SLIDE incomparable rigidity and consistency.

The E-SLIDE comes in 3, 4 and 6 foot lengths. It mounts to any Mitchell base by way of a sealed bearing pan assembly that can be mounted in center or offset positions. The pan assembly can also be removed, providing a rigging friendly base that is also speedrail compatible.

More Details...


QTY:

$ 169.00/day

Add to Quote

  
E-Slide Camera Slider, 6 foot

The E-SLIDE camera slider is a state of the art tool for motion picture. Precision linear bearings on case hardened steel rails make for smooth, effortless travel. The custom machining of the base and rail supports give the E-SLIDE incomparable rigidity and consistency.

The E-SLIDE comes in 3, 4 and 6 foot lengths. It mounts to any Mitchell base by way of a sealed bearing pan assembly that can be mounted in center or offset positions. The pan assembly can also be removed, providing a rigging friendly base that is also speedrail compatible.

More Details...


QTY:

$ 199.00/day

Add to Quote

  
Helmet Cam

cameras not included

More Details...


QTY:

$ 49.00/day

Add to Quote

  
EgripZ Handheld Camera Support

The Anton-Bauer EgripZ handheld camcorder support is an ergonomic grip which helps small camcorders look like larger, heavier systems without the requisite backache. Wide, flexible handles allow one hand to smoothly and efficiently convey the camera while the other hand is freed completely to manipulate the zoom, focus, and iris controls.

More Details...


QTY:

$ 15.00/day

Add to Quote

  
Sony Wall Mount for BRC-300 PTZ Camera

This Sony Wall Mount Bracket is a wall mount kit designed for supporting BRC PTZ cameras.

More Details...


QTY:

$ 10.00/day

Add to Quote

  
Zacuto ENG Grip Relocator for Canon C100 or C300

Fits Canon C100 or C300 Removable Grip
15mm Rod Clamp Mounting Bracket
24inch Cable with Right angle Connector

More Details...


QTY:

$ 35.00/day

Add to Quote

  
Zacuto Zwiss Plate V2

Mounts to 15mm Light Weight Support Rods
1/4"-20 & 3/8"-16 Mounting Holes
Pre-Labeled Accessory Mounting Holes
Side Mounting Holes for Zacuto Wireless
Machined from Solid Aluminum
Four 15mm Rod Clamps
Spring Loaded Ratcheting Levers

More Details...


QTY:

$ 25.00/day

Add to Quote

  
Wooden Camera Director's Monitor Cage

Carry your director's monitor with you using the Wooden Camera Director's Monitor Cage. The cage is based on a universal plate system that secures to your monitor using its 1/4"-20 mounting points. In addition to holding your monitor, the cage allows for the mounting of a separately available V-mount or Gold-mount plate for battery power, and it also leaves plenty of room for wireless equipment, so you can remain untethered on set. Comfortable foam handgrips attach to the sides of the cage, great for carrying around and checking shot composition from anywhere. The front of the monitor is unimpeded, so you can mount sunhoods or other accessories. When not in use, or if you want to keep your setup in the same place, you can secure the cage on an available C-stand (baby pin).

Product Highlights:
Rig up Your Director's Monitor
Mount a V-Mount/Gold-Mount Battery Plate
Space for Wireless Receivers
Foam Handgrips
Unimpeded Access to Monitor Front Panel
C-Stand Mountable

Compatible Devices:
SmallHD: DP4, DP6, AC7, DP7
TVLogic: VFM-056W/WP, VFM-058W
Ikan: D5, VK7i, VH8, VL5, VX9e
Convergent Design: Odyssey 7/7Q
Atomos: Samurai, Ninja, Shogun

More Details...


QTY:

$ 39.00/day

Add to Quote

  
Wooden Camera Directors Monitor Cage v2

The Wooden Camera Director's Monitor Cage v2 accepts virtually any 9" LCD on-camera monitor, allowing it to be securely held and carried by a director or anyone who needs to have a personal monitor during a shoot. Featuring wooden handgrips, a padded neck strap, and a swing-away design for easy access to the back, this cage makes carrying a small monitor both simple and comfortable. Based on a universal plate system that mounts your monitor using 1/4"-20 mounting points on the side, top, or bottom of your monitor. In addition to holding your monitor, the cage allows for the mounting of a separately available V-mount or Gold mount plate for battery power, and it also leaves plenty of room for wireless equipment, so you can remain untethered on set.

Works with:
Blackmagic Video Assist
SmallHD DP4, DP6, AC7, DP7, 503, 703
TVLogic VFM-056W/WP, VFM-058W
Ikan D5, VK7i, VH8, VL5, VX9e
Odyssey 7, 7Q
Atomos Samurai, Ninja, Shogun
And many more

More Details...


QTY:

$ 59.00/day

Add to Quote

  
Easyrig VARIO 5 - Gimbal Rig Vest and 5in Extended Arm with FLOWCINE SERENE

Easyrig Vario 5 - Gimbal Rig Vest and 5" Extended Arm with Flowcine Serene and Serene Extension Preinstalled

For standard sized cameras, small gimbals and varying camera weights. Y-Axis stabilizer and labor charge. Low cost option for extended arm length.

More Details...


QTY:

$ 399.00/day

Add to Quote
 


We accept major credit cards with 
          PayPal